User Manual

Rev.12012-07-05
HowtoInstallthemoduleintoapowerchassi:
1)PowerOFFthepowerchassi
2)Unpackthemoduleandmakesurenothingsurroundsthecardedgeconnector
3)Carefullyslidethemoduleintoanemptyslotinyourpowerchassi
4)MakesurethemoduleconnectorssitswellintothematingEdacchassiconnector
5)PowerONthepowerchassi
6)Rock’n’Roll
FEATURESANDSPECIFICATIONS
*TransformerBalancedOutput
*1176stylecompressor/limiter
*ParallelCompression
*SideChainHighPassFilter
*Compatiblewithall500seriespowerchassis
*Runson+/-16V
*PowerConsumption100mA
*InputImpedance25kOhm
*OutputImpedance70Ohm
*Max.Output+26dbu
*Freq.Resp.20Hz-20kHz
*SizeModule1.5"X5.25"X7"
Specificationsaresubjecttochangewithoutnotice.
www.lindellaudio.se
[e-mail]