AMPX USER MANUAL www.lindellaudio.se info@lindellaudio.se Rev.
Thank YOU for purchasing the Lindell Audio AMPX Class A amplifier! The AMPX is a dual mono pure Class A power amplifier. Consisting of only the finest components available on the market today! The AMPX was designed primary for smaller passive recording studio monitors like NS-10's, Proac’s, etc. Where you want high resolution and neutral amplification. www.lindellaudio.se info@lindellaudio.se Rev.
FEATURES AND SPECIFICATIONS * Dual Mono Design * Class A * Balanced +4 Line Inputs and Ouputs * Dual High power toroidal transformers * 40W (8Ω, Class A) * Power Consumption(Static State) 130W * Input Sensitivity 1.2V * Input Impedance 47kOhm * Frequency Response 10Hz-100KHz (±1.5dB) * S/N Ratio 100dB * THD 0.03% * 2mm thick gold-plated PCB board * Shipping Weight 48.5 lbs, (22Kg) * Dimensions (W*H*D) 483mm*118mm*445mm Specifications are subject to change without notice. www.lindellaudio.
CREDITS * Concept & Design: Tobias Lindell * PCB, Circuit & Electrical Design: Audreal Electronics * Country of Manufacturing: Chengdu, China COMPANY INFORMATION I started ”Lindell Audio” back in 2010 and set out to design recording studio equipment to satisfy my own way of working. Developing functions and user interface that didn’t excist on the market. I’m resident producer at Bohus Sound Studios. http://bohussound.
