Computer Monitor User Manual

User manual 15” & 17” LCD Terminals

Features

• The LINDY LCD Terminal is designed for use in standard 60cm to 120cm

depth, 19” cabinets. It requires a mounting depth of at least 50cm and a

distance between front and rear 19” rails of at least 43cm.

• The complete drawer can be fully slid in and out of the rack.

• It also offers the option to pull out the LCD tray only and flip it up so that the

screen can be viewed while the keyboard is hidden, and the cabinet doors

are closed and locked.

• 15” 1024 x 768 Active Matrix TFT LCD Screen with support for VGA, SVGA

and XGA

• 17” 1280 x 1024 Active Matrix TFT LCD Screen with support for VGA,

SVGA, XGA and SXGA. Also supports SUN resolution of 1152x900

• Built-in 5 language OSD for display adjustment

• Backlight lifetime of 50,000 hours

• PS/2 touch pad

• PS/2 keyboard and separate numeric keypad

• 100-240V AC wide range power supply

• Dimensions: 450/485 x 460 x44mm (WxDxH)

• Weight approx. 15kg, 17kg with packaging

• Environmental Specification – For indoor use only :

o Temperature: 5 ~ 40° C (Operating) 1~50° C (Storage)

o Relative Humidity: 10~90%, Non-Condensing

KVM LCD Terminal Installation and Use

Installing the drawer into a 19” cabinet

Important note:

Because the complete

drawer provides the option to slide the

LCD screen out of the rack, allowing it to

be flipped up, you have to make sure that

the rear brackets:

1) can be slid over a distance up to 14cm

2) do not come apart from each other

when slid out 14cm

Please measure the distance between front and rear 19” rails of your cabinet and

select the appropriate rear brackets.

Distance between

19“ rails