User manual

Single Rail Console For Modular KVM Switch User Guide
II
Safety Instructions
1. Please read these safety instructions carefully.
2. Please keep this User’s Manual for later reference.
3. Please disconnect this equipment from the AC outlet before cleaning. Do not use liquid or
sprayed detergent for cleaning. Use a moist sheet or cloth for cleaning.
4. It is recommended that for your convenience the equipment is installed near an easily
accessible power socket.
5. Please keep this equipment in a non-humid environment.
6. Before starting the installation ensure that your equipment is situated on a stable, level
surface. A drop or fall could cause injury.
7. Do not leave this equipment in an unconditioned environment, storage temperatures above
60
0
C or humidity may damage to the equipment.
8. The opening on the enclosure is for air convection, to prevent the equipment from
overheating. DO NOT COVER THE OPENING.
9. Ensure that the voltage of the power source you are connecting to the equipment matches
the supported input voltage.
10. Please keep the power cord in such a way that people can not step or trip on it. Do not place
anything over power cord. The power cord must be correctly rated for the voltage and current
marked on the product’s electrical ratings label. The voltage and current rating of the cord
should be greater than the voltage and the current rating marked on the product.
11. All cautions and warning on the equipment MUST be noted.
12. If the equipment is not in use for a long period, disconnect the equipment from the mains to
avoid being damaged by transient over-voltage.
13. Never pour any liquid into the ventilation openings; this could cause a fire or an electrical
shock.
14. Never open the equipment. For safety, ONLY qualified service personnel should open the
equipment.
15. If one of the following situations arises, get the equipment checked by service personnel.
• The power cord or plug is damaged.
• The equipment has been exposed to moisture.
• The equipment has not worked well or you can not get it to work according to this
User Manual.
• The equipment has been dropped or damaged.
• If the equipment shows obvious signs or breakage.