VGA to DVI Scaler Manual English LINDY No. 32563 www.lindy.
Manual English Introduction Thank you for purchasing the LINDY VGA to DVI Scaler. The VGA to DVI Scaler takes your analogue VGA or Component Video signal and scales it to DVI, in either analogue or digital format. Perfect for use with LCD, Plasma and Projector displays the VGA to DVI scaler will automatically detect the input type, and allow you to choose your preferred output resolution using an OSD (on screen display).
Manual English Pressing the MENU button will bring up the OSD (on screen display) menu controls on the screen as follows: • • • • • • • • Input set up Output Setup Picture Adjust HV Adjust OSD Adjust System Information Auto Adjust Exit Use the + and – keys to move the arrow cursor to your desired selection, then press MENU to confirm your selection and enter into sub menu.
Manual English Picture Adjust When entering the Picture Adjust menu you will see the following: Use the + and – keys to highlight the setting you want to adjust and then press MENU. You can now adjust the setting using the + and – keys accordingly. Press MENU again to save your changes and return to the Picture Adjust menu. The table below shows the range for each setting along with the factory default values.
CE/FCC Certifications This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Recycling Information WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products United Kingdom In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process.