User manual

User Guide

Installation

Connect the VGA plug (1) of the adapter cable to the VGA input of the Skew Compensator.

Then connect the other VGA plug (2) of the adapter cable to the output of the VGA extender´s

receiver unit.

Plug the power cable´s DC plug (3) into the 5V DC socket of the receiver unit and the receiver´s

power supply into the power cable socket (4) of the adapter cable.

Finally, connect the output VGA socket of the Ske

w Compensator with the Monitor.

When you switch on the monitor, you will see the colour shift. By using a screw driver you can

now adjust the three RGB colours red, green and blue. WhenWhen

´s