manual

3. Linkage: Press the “linkage” button to read back all the status ID’s

4. Open/Close: Press either the “open” or “close” button to open or close the COM

port

5. Mapping:

Select All Output: Click on “Select All Output” then

select the source on the main menu. This quickly

sets all the outputs to the same source.

Unselect All Output: This releases all the outputs

Select Input 1~8 Output: Select the input source,

then select the output port icon.

Example: click on “Select Input 1 – Output”, then

select output port 1 & 2. The video and audio will

be sent to port 1 & 2.

6. Fast Select:

Input Num – Output Num: This will set all input

Ports to its corresponding output port

ie. 1 to 2, 2 to 2

Input 1-8 – All Output: Quickly send the same

source to all outputs

7. Command Set

• RS-232 Transmission format:

• Baud rate: 9600 bps

• Data length: 8 bits

• Parity check: None

• Stop bit: 1 bit

Full details of the RS-232 protocols can be found on the CD provided:

D:\02 Documentation\01.Serial Command Set\8x8 Matrix_Command Set

D:\02 Documentation\02.RS-232 Protocol Terminal\8x8 Matrix_ProtocolTerminal