User manual

User Manual English
Receiver
Top Panel & LEDs
Back Panel & Ports
IR Remote
 Source LEDs
One of these two LED indicators is lit in solid
blue to show which HDMI input is being used.
 Power Button with LED indicator
Press to turn the Receiver on/off. The LED in the
power button is lit in solid blue when the power is
on, and turns red in standby mode.
 Source Button
Press to switch between HDMI inputs.
 HDMI OUT
Connect the Receiver to an HDMI equipped display
or projector, via an HDMI cable.
 DC IN
Connect the supplied USB power adapter.
 POWER
Press to turn the Transmitter & Receiver on/off. When both the
Transmitter and Receiver are switched off (Power LED is lit Red) press
this button to wake both units up.
 SOURCE
Press to switch between the HDMI devices connected to the
Transmitter.
 IR
Press to switch the IR Blaster frequency to meet the HDMI source
device’s requirement. It can switch the IR Blaster frequency from 47K to
56K to 38K.
 INFO
Press this button to display system related information via the OSD on
the HDMI display/projector connected to the Receiver.
 TRANSMITTER NO.
Press this button to switch between Transmitters. Please refer to the
Using Multiple Transmitters section of this manual.