User manual

English User Manual

Installation

Before connecting any devices, please ensure everything is powered off.

• Connect the 5V DC power supply

Converting video signals

• Connect the video source to the selected Converter using an appropriate cable

• Connect the output device to the Converter using an appropriate cable

Extending video signals

• Connect the DVI-D/HDMI video source to the selected Converter using an appropriate input cable

• Connect coaxial cable to the SDI output of one Converter and the SDI input of the other

• Connect the Converters DVI-D/HDMI output to the display using an appropriate cable

Audio signals

• Audio can either be sent from/via the DVI-D/HDMI or a separate 3.5mm stereo audio input/output

by using the Audio SW switch

Note – Not all DVI devices support audio – please check with the DVI equipments manufacturer for

details.

Once all cables are connected to the Converters, power on all devices.

Some connection diagrams are shown on the following pages, to provide some examples of how these

products may be installed.