User guide

 




75
Congure IP port
Available only on MC5-IP models,
the IP port conguration menu
allows you to determine settings that
relate directly to the global (IP) user
aspects of the unit:
• Unit Conguration
IP admin password, encryption
settings, etc.
• Network Conguration
IP address, net mask, VNC port,
etc.
• Modem Conguration
Baud rate, initialisation string,
etc.
• Reset Conguration
Completely resets the IP portion
of the MC5-IP unit.
Unit Conguration
This page provides access to
a selection of both basic and
fundamental settings for the MC5-IP.
Keyboard
Use the arrow buttons to match the
keyboard layout expected by the host
system.
Admin Pwd
Enter the password that will be used
to gain administrator access to the
MC5-IP. There can only be one admin
user and only that user is given access
to the conguration menus. The
admin password background will be red until a reasonably secure password has
been entered, although this is only advisory as any password or no password
may be entered.
Unit Name
The name entered here will be displayed on the local menus and the remote
VNC/browser windows.
Time and Date
Use the left and right arrow keys to select the correct time and date. The time
entry uses the 24 hour clock notation. The internal real time clock will continue
to run for roughly one week without power to the unit, after that it will be lost
and require resetting. Use the up and down arrow keys to move between each
of the sections within the time and date entries.
Encryption
Three options are available: Always on, prefer off, prefer on. The one to choose
depends on the specic details of your installation - see Encryption settings for
details. The use of encryption imposes a slight performance overhead of roughly 10%
but is highly secure against third party intrusion.
To get here
1 From a local or remote (not accessible from a global keyboard), log on as
the ‘admin’ user.
2 Press (hotkeys can change).
3 Press to select ‘More menus’.
4 Select ‘Functions’.
5 Select ‘Congure IP port’.
LINDY MC5
Configuration
Unit Configuration
Network Configuration
Modem Configuration
Reset Configuration
Back
Enter-Select
-Up -Down
Esc-Exit
LINDY MC5
Unit Config
Hardware Rev
1
Firmware 1.0b7
Keyboard UK
Admin Pwd
Unit Name AV CATx
Time 11 : 14 : 44
Date 27 Apr 2006
Encryption Prefer Off
Enter-Select
-Up -Down
Esc-Exit
Space-Toggle