USB to VGA Adapter User Manual English LINDY No. 42983 www.lindy.
User Manual English Introduction Thank you for purchasing the LINDY USB to VGA Adapter. The USB to VGA Adapter allows you to connect any monitor, LCD or Projector to your PC or notebook. You can use it as your primary display or to mirror or extend your desktop. With high speed USB 2.0 technology, there is no need to add a second graphics card to your.
User Manual English Installation NOTE: You must install the driver before attaching the USB to VGA Adapter to your computer. 1. Insert the driver CD into your CD-Rom drive and follow the on screen instructions 2. Once the installation has finished you must restart your computer 3. Turn on the power to your 2nd monitor and connect it to the USB to VGA Adapter 4. Plug the adapter into an available USB 2.0 port on your computer 5.
User Manual English Display Utility Once the driver has been installed and the computer has rebooted, the display utility will appear on the taskbar. This utility allows you to quickly change the settings and resolution of your USB to VGA Adapter. To access the menu, right click on the icon. USB - VGA (Extended) The default setting for the USB to VGA Adapter is the extended setting.
User Manual English USB - VGA (Off) Right click on the display utility icon on the taskbar and select USB-VGA (Off) to disable the USB to VGA Adapter. Display Properties To edit the Display Properties for the USB to VGA Adapter, go to Control Panel, double click on the Display icon and then select the Settings tab. Click on the Display pull down menu and select the USB 2.0 VGA Device. From here, you can change the resolution and colour depth as desired. Click OK to apply the settings.
User Manual English Q: There are lines running horizontally up and down my screen. A: This is due to a low refresh rate setting. You can change this setting by going to the Control Panel, Display Properties, Settings, Advanced and Monitor tab. Make sure you select the USB 2.0 VGA Device first and not set the refresh rate higher than what your monitor can support. This may damage your monitor. You can also try to reset/refresh/resynchronize your monitor.
CE/FCC & Recycling Information CE Certification This equipment complies with the requirements relating to electromagnetic compatibility, EN55022/EN55024 class B for IEC/EN61000-4-2/3 the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. FCC Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.