Wireless LAN - 11 Access Point Short Manual Kurzhandbuch Manuel condensé Estratto del Manuale English Deutsch Français Italiano LINDY Art. Nr. 52020 Version Europe: NOT FOR USE IN France + Spain LINDY Art. Nr.
English Short Manual 1. Introduction The LINDY W-LAN 11 (Wireless LAN with 11 Mb/s) offers a quick and reliable solution for professional wireless networking. It is compliant with standards IEEE802.11b and 802.11. and is ideally suited for use in historic buildings where no structured cabling can be installed, for the request of mobile moving network access inside a building, and for free and open network access (Internet) i.e. in universities, hotels etc. Connections can be established as peer-to-peer (i.
English Short Manual Rear view of your W-LAN 11 Access Point: 100M TX POWER Power: MDI: MDI-X RS-232 LED’s Link RX MDI OR MDI-X RS-232 Connect the power adaptor here. RJ-45 connector for Ethernet Hub with10BaseT or 100BaseTX.
English Short Manual 3.1. Access Point Manager Configuration Utility The Windows based configuration program; Access Point Manager provides easy monitoring, checking and changing of the Access Point parameters. Place the enclosed CD or Floppy disk into the computer you want to use to connect to the AP. Start the set-up program setup.exe from the enclosed CD or diskette and follow the instructions given there. When finished start the program Access Point Manager.
English Short Manual Configuration The configuration tool provides four different modes of operation for the Access Point: General Standard AP with Roaming Inter Building AP (Repeater, PxP) Station Adapter – Infrastructure (SAI) Station Adapter Ad-hoc (SAA) (For further details please refer to the extensive English reference manual) IEEE802.11 ,ESSID’ depicts the name of the W-LAN you are installing.
English Short Manual 3.2. Web Management Utility The Access Point also provides a web browser graphic user interface With the preset IP-Address http://192.168.1.1 you will have access to the Access Point Web Page. Enter password to continue. The contents of the following pages are very similar to the information already given in the sections before 3.1. Access Point Manager Configuration Program. (For further details please refer to the extensive English reference manual) 3.3.
English Short Manual 4. Troubleshooting If you have trouble using the W-LAN 11 Wireless LAN Access Point, the starting point to troubleshoot any problems is by looking at the LED activity on the Access Point. The following “LED Error Table” is provided to assist you in diagnosing and solving operational problems. PWR AP WLAN LAN LINK Description/Action Steady Normal operation where Continuous Flash Flash Green flickering indicates interface Green Green Green activity. Continuous No action required.
Deutsches Kurzhandbuch 1. Einleitung Das LINDY W-LAN 11 (Wireless LAN mit 11 Mb/s) bietet eine schnelle und zuverlässige Lösung für kabellosen Netzwerkzugriff. Es ist kompatibel zum W-LAN Standard IEEE802.11b und 802.11. Es ist prädestiniert für den Einsatz in historischen Gebäuden, in denen kein Kabelnetzwerke verlegt werden können, für die Anforderung mobile Einsatzorte innerhalb eines Gebäudes oder um einen allgemeinen freien Netzwerkzugang (z.B.
Deutsches Kurzhandbuch Die Rückseite des W-LAN 11 Access Point : 100M TX POWER Power: MDI: MDI-X RS-232 LEDs Link RX MDI OR MDI-X RS-232 Schließen Sie hier das mitgelieferte Netzteil an. RJ-45 Buchse zum Anschluss an Ethernet Hub mit 10BaseT oder 100BaseTX.
Deutsches Kurzhandbuch 3.1. Access Point Manager Konfigurationsprogramm Das Windows basierte Konfigurationsprogramm Access Point Manager erlaubt die einfache Konfigurierung aller Parameter des Access Points. Legen Sie die CD oder Floppy in den Rechner mit dem Sie den Access Point konfigurieren wollen. Starten Sie das Setup-Programm setup.exe von der mitgelieferten Diskette oder CD und folgen Sie den Anweisungen. Nach Abschluss der Installation starten Sie das Programm Access Point Manager.
Deutsches Kurzhandbuch Konfiguration Das Konfigurationstool ermöglicht verschiedene Betriebarten für den Access Point: General Standard AP mit Roaming Inter Building AP (Repeater, PxP) Station Adapter –Infrastructure (SAI) Station Adapter Ad-hoc (SAA) (Details siehe ausführliches Englisches Handbuch) IEEE802.11 ‚ESSID’ bezeichnet den Namen des von Ihnen einzurichtenden Netzwerkes.
Deutsches Kurzhandbuch 3.2. Web Management Utility Der Access Point stellt ebenfalls eine Browser Seite als graphische Konfigurationsoberfläche zur Verfügung. Nach Eingabe der voreingestellten IP-Adresse http://192.168.1.1 (Lieferzustand) sehen Sie die Access Point Web-Seite mit der Aufforderung zur Eingabe des Passwortes. Die Inhalte der Folgeseiten sind weitestgehend identisch mit den oben unter 3.1. Access Point Manager Konfigurationsprogramm genannten.
Deutsches Kurzhandbuch 4. Fehlersuche Bei Problemen mit dem W-LAN 11 Access Point sollte der Fehler systematisch ausgehend von den LED Anzeigen auf dem Access Point analysiert werden. Die folgende Tabelle gibt Hinweise bezugnehmend auf den Zustand der LEDs: PWR Leuchtet dauerhaft grün AP WLAN LAN LINK Beschreibung/Massnahme Normalbetrieb, das Flackern zeigt Dauerhaft Flackert Flackert grün Datentransfer an. grün grün grün Alles OK.
Manuel condensé en français 1. Introduction Le LINDY W-LAN 11 (Réseau sans fil à 11 Mb/s) offre une solution rapide à mettre en place et efficace pour un réseau professionnel. Ce produit est conforme aux standards IEEE802.11b et 802.11. et convient particulièrement dans les anciens bâtiments où il est impossible d’installer un câblage réseau et d’y apporter des modifications par la suite, et dans les universités, hôpitaux, pour un accès réseau dédié (Internet). Les connexions sont établies par paire (ex.
Manuel condensé en français Vue arrière de votre point d’accès W-LAN 11: 100M TX POWER Power: MDI: MDI-X RS-232 LED’s Link RX MDI OR MDI-X RS-232 Connectez l’adaptateur d’alimentation ici. Connecteur RJ-45 pour Hub Ethernet 10BaseT ou 100BaseTX.
Manuel condensé en français 3.1. Utilitaire de configuration Access Point Manager Le programme de configuration Windows, Access Point Manager vous fournit une consultation facile, une vérification et la modification des paramètres du point d’accès. Insérez le CD ou la disquette dans le lecteur de l’ordinateur que vous souhaitez connecter. Lancez le programme d’installation setup.exe de la disquette ou du CD-ROM fourni et suivez les instructions suivantes.
Manuel condensé en français Configuration L’utilitaire de configuration fournit quatres différents modes d’utilisation pour le point d’accès: General Standard AP with Roaming Inter Building AP (Repeater, PxP) Station Adapter – Infrastructure (SAI) Station Adapter Ad-hoc (SAA) (Pour plus de détails, veuillez vous référer à l’extension anglaise du manuel) IEEE802.11 ‚ESSID’ est différent du réseau W-LAN que vous installez.
Manuel condensé en français 3.2. Utilitaire Web Le point d’accès fournit une interface web pour l’utilisateur Avec l’adresse IP préréglée http://192.168.1.1 vous aurez accès à la page web du point d’accès. Entrez le mot de passe pour continuer. Le contenu de la page suivante est très similaire aux informations indiquées au paragraphe précédent 3.1. Configuration du point d’accès. (Pour plus de détails, consultez l’extension anglaise de ce manuel) 3.3.
Manuel condensé en français 4. Problèmes techniques Si vous rencontrez des problèmes durant l’installation du point d’accès W-LAN 11, la première chose à faire pour résoudre le problème est de vérifier l’activité des LEDs sur le point d’accès. Le tableau des erreurs LED suivant vous permettra certainement de résoudre le problème: PWR AP WLAN LAN Vert Vert Vert Continu Clignot. Cligno.
Estratto del Manuale in Italiano 1. Introduzione La LINDY W-LAN 11 (Wireless LAN con 11 Mb/s) offre una soluzione rapida ed affidabile per trasmissioni in cablaggi di rete professionali senza fili. E’ compatibile con gli standard IEEE802.11b e 802.11. ed è ideale per l’utilizzo in edifici storici dove non vi è una struttura che non può essere cablata, per la richiesta di accesso alla rete all’interno di un edificio, e per libero ed aperto accesso alla rete (Internet) p.es. nelle università, hotel ecc.
Estratto del Manuale in Italiano Visione posteriore del vostro W-LAN 11 Access Point: 100M TX POWER Power: MDI: MDI-X RS-232 LED Link RX MDI OR MDI-X RS-232 Collegare qui l’alimentatore. Connettore RJ-45 per Hub Ethernet con 10BaseT o 100BaseTX.
Estratto del Manuale in Italiano 3.1. Configurazione delle Utility da Access Point Manager Il programma della configurazione di base di Windows; Access Point Manager permette un facile monitoraggio, controllo e cambio dei parametri dell’Access Point. Inserire nel computer che desiderate utilizzare e collegare all’ AP, il CD o il Floppy disk che è compreso nella fornitura. Avviare il programma di installazione setup.exe dal CD o dal dischetto e seguire le istruzioni successive.
Estratto del Manuale in Italiano Configurazione I metodi di configurazione prevedono Quattro differenti modi di operare per l’Access Point: Generale Standard AP con Roaming AP Edifici Sotterranei (Ripetitore, PxP) Adattatore Stazione – Infrastrutture (SAI) Adattatore Stazione Ad-hoc (SAA) (Per ulteriori dettagli prego fare riferimento alle estensioni del manuale in Inglese) IEEE802.11 ‚ESSID’ definisce il nome della W-LAN installata.
Technical Data / CE Declaration of Conformity 3.2. Utilità Web Management L’Access Point dispone anche di un’ interfaccia grafica web browser Con gli Indirizzi-IP iniziali http://192.168.1.1 potete avere accesso alla pagina Web dell’Access Point. Inserire la password per continuare. I contenuti delle seguenti pagine sono molto similari alle informazioni fornite nelle pagine precedenti nella sezione 3.1. Configurazione Programma Access Point Manager.
Technical Data / CE Declaration of Conformity 4. Soluzione ai Problemi Se avete difficoltà ad utilizzare il W-LAN 11 Wireless LAN Access Point, il punto di partenza per ogni problema è guardare I LED di attività sull’ Access Point. La seguente “Tabella Errori LED” è prevista per assistervi nella diagnostica e nelle operazioni per la risoluzione dei problemi. PWR AP WLAN LAN Verde Costante Flash Verde Flash Verde Verde Costante Off n Off Off - Off Off Off Off Intermitt.
Technical Data / CE Declaration of Conformity EG-Konformitätserklärung gemäß dem Gesetz über Funkanlagen und Telekommunikationsendeinrichtungen (FTEG) und der Richtlinie 1999/5/EG (R&TTE) EG-Konformitätserklärung gemäß dem Gesetz über Funkanlagen und Telekommunikationsendeinrichtungen (FTEG) und der Richtlinie 1999/5/EG (R&TTE) EC Declaration of Conformity in accordance with the Radio and Telecommunications Terminal Equipment Act (FTEG) and Directive 1999/5/EC (R&TTE Directive) EC Declaration of Conformi
Technical Data / CE Declaration of Conformity Product LINDY W-LAN 11 Wireless LAN Access Point Wired Interface 10/100BaseT (RJ-45) Serial Port DB9 RS-232 (configuration port) Wireless Interface 11Mbps Wireless LAN IEEE 802.11/11b Modulation DSSS (CCK, DQPSK, DBPSK) Operating Frequency Europe CE/ETSI: 2.412~2.472 GHz (13 channels) LINDY Art.No. 52020 Europe France: 2.457~2.472 GHz (4 channels) LINDY Art.No. 52022 [Europe Spain: 2.457~2.462 GHz (2 channels)] Speed Options 11M/5.