User manual

User Manual
70409 - Analogue to Digital Audio Convertor
Introduction
Thank you for purchasing the LINDY analogue to digital audio convertor. This convertor allows
you to input analogue audio through left and right phono ports and output digital audio through
Coaxial/optical ports. A switch on the side of the unit determines which digital input is active.
The output digital audio signal is a 2-channel uncompressed LPCM (Linear Pulse Code
Modulation) with a sampling rate at 48 KHz. Both Optical Fibre and Coaxial cables can be
connected at the same time and can run up to 5 meters while still provide reliable and lossless
audio signal transmission.
Specifications
• Input ports: 2 x Phono (Left & Right)
• Output ports: 1 x TOSLink (Optical Fibre) & 1 x Coaxial
• Supports uncompressed 2-channel LPCM (Linear Pulse Code Modulation) digital audio
signal output
• Supports output sampling rate at 48 KHz
• Power Supply: 5VDC 0.5A
• Dimensions: (WxDxH) 46 x 46 x 23.5mm
• Weight: 30g
• Housing: Plastic
• Colour: White
Operation
Side View
1. Power: Plug 5VDC PSU (included) into the unit and connect to a wall outlet
Front Panel Rear Panel
1. Phono input: Connect your phono audio equipment
2. Coaxial/optical output: Connect to your digital audio device input port