HDMI Scaler/Switch Quick Start Guide English LINDY No. 32596 www.lindy.
HDMI Scaler/Switch User Manual 1. Introduction Thank you for purchasing the LINDY HDMI scaler with remote control. This high performance scaler is designed to upscale digital & analogue signals from Composite, S-Video, PC, Component (HD) and HDMI devices to a digital HDMI output. Besides up scaling to HDTV (1080p) and WUXGA (1920x1200) the scaler also converts analogue audio to digital then outputs through HDMI or coaxial S/PDIF.
HDMI Scaler/Switch User Manual Rear Panel 1. 2. 3. 4. 5. 6. 7. 8. 9. HDMI & CO-AX Out: Connect the HDMI output port to the HDMI input port of your display.
HDMI Scaler/Switch 4.
HDMI Scaler/Switch 5. Remote Control 1. POWER: Press the button once to power on the unit. Press again to enter standby mode. 2. INPUT: Press the button repeatedly to toggle through the various input sources. 3. HD Input: Press the button to directly select component input. 4. PC Input: Press the button to directly select PC input. 5. HDMI/DVI Input: Press the button to directly select HDMI (or DVI) input. 6. Output Resolution: Press any one of the buttons to directly select output resolution.
HDMI Scaler/Switch • • • • Coaxial (S/PDIF) Output Ports: HDMI Coaxial 5V DC power supply Dimensions: 215 x 154 x 47 (WxDxH) Weight: 1Kgs 7.
CE/FCC/WEEE/Statement CE Statement This device complies with the European Regulations for Electromagnetic Compatibility (EMC) of the European Union and it is equipped with the CE mark. This unit has to be used with high quality shielded connection cables. Only if these high quality shielded cables are used it can be sure that the EMC compatibility is not adversely influenced.
