HDMI Switch Remote User Manual Benutzerhandbuch Manuel Utilisateur Manuale d’uso English Deutsch Français Italiano LINDY No. 32592 www.lindy.
User Manual................Page 2 Benutzerhandbuch.....Page 5 Manuel Utilisateur.......Page 8 Manuale d’uso.............
User Manual English Introduction Thank you for purchasing the LINDY HDMI Switch Remote. This high performance switch allows you to connect up to 3 DVI/HDMI devices to a single DVI/HDMI equipped TV or projector. Designed for Home Theatre/Cinema installations, the HDMI Switch Remote is fully HDCP compliant and supports multi-channel audio and HDTV resolutions of up to 1080p. Switching between devices is achieved using the push button on the switch or the supplied infra-red remote control.
User Manual English Connection & Operation Rear Panel Connections 3 2 1 1. HDMI output: Using an HDMI cable, connect the HDMI OUT to the HDMI input on your display 2. HDMI inputs: Use HDMI cables to connect the HDMI outputs of your source devices to the three HDMI IN inputs. 3. Power input: Connect the supplied 5V DC power supply Notes on using DVI equipped devices: To connect devices equipped with DVI connections, you can use either modular DVI/HDMI adapters or DVI/HDMI adapter cables.
User Manual English Troubleshooting There is no picture on the display. Check the HDMI Switch Remote and all connected devices are correctly powered up and switched on. Make sure all cables and connectors are correctly installed. If a computer is connected, hit a key or move the mouse to wake it from power saving mode. The HDMI Switch Remote does not respond to any commands from the remote control.
Benutzerhandbuch Deutsch Einführung Wir gratulieren Ihnen zum Erwerb des LINDY HDMI Switch Remote. Sie haben mit diesem Gerät eine gute Wahl getroffen. Sollten Sie nicht zufrieden sein oder Probleme haben, so wenden Sie sich bitte an den Techniksupport bei LINDY. Dieser High End Umschalter erlaubt Ihnen zwischen 3 HDMI bzw. DVI-Signalquellen umzuschalten und das Bild auf Ihrem TV oder Projektor mit HDMI bzw. DVI Schnittstelle auszugeben.
Benutzerhandbuch Deutsch Anschluss & Betrieb Rückseitige Anschlüsse 1. 2. 3. 3 2 1 HDMI Ausgang: Schließen Sie hier Ihren TV oder Projektor an. Verwenden Sie ein HDMI/HDMI oder HDMI/DVI-D Kabel HDMI Eingänge: Schließen Sie hier bis zu 3 Signalquellen an. Verwenden Sie HDMI/HDMI oder HDMI/DVI-D Kabel. DC / Versorgungsspannung: Schließen Sie hier das beiliegende 5V DC Netzteil an.
Benutzerhandbuch Deutsch Fehlersuche Kein Bild auf dem TV/Projektor Prüfen Sie ob alle Geräte korrekt eingeschaltet sind Prüfen Sie ob alle Kabelanschlüsse korrekt sitzen, auch vom Netzteil Falls ein Computer angeschlossen ist, prüfen Sie ob er sich im Sleep-Modus befindet und wecken Sie ihn gegebenenfalls auf. Prüfen Sie, ob bei direktem Anschluss der Signalquelle an den TV / Projektor ein Bild korrekt angezeigt wird.
Manuel Utilisateur Français Introduction Merci d’avoir acheté le LINDY HDMI Switch Remote. Ce commutateur haute performance vous permet de connecter jusqu’à 3 périphériques DVI/HDMI à un seul récepteur DVI/HDMI comme une télé ou un projecteur. Conçu pour les installations Home Cinema, le HDMI Switch Remote est compatible Full HDCP et supporte de l’audio multi canal et résolutions HDTV jusqu’à 1080p.
Manuel Utilisateur Français Connexion & Utilisation Connexions Face Arrière 3 2 1 1. Sortie HDMI: En utilisant un câble HDMI, connectez HDMI OUT à l’entrée HDMI sur votre affichage 2. Entrées HDMI: Utilisez un câble HDMI pour connecter les sorties HDMI de vos périphériques source aux trois entrées HDMI IN. 3.
Manuel Utilisateur Français Problèmes rencontrés Il n’y a pas d’affichage. Vérifiez les connexions sur le HDMI Switch Remote et vérifiez que tous les périphériques connectés soient alimentés Assurez-vous d’avoir connecté tout les câbles. Si un ordinateur est connecté, appuyez sur une touche pour sortir de l’économie d’énergie. Le HDMI Switch Remote né répond à aucune commande de la télécommande . Si présent, retirez la partie plastique indiquant ‘Remove this tab’.
Manuale d’uso Italiano Introduzione Grazie pre aver scelto LINDY HDMI Switch Remoto. Questo switch ad alte prestazioni consente di collegare fino a 3 dispositivi DVI/HDMI a un televisore o proiettore DVI/HDMI. Progettato per installazioni Home Theatre/Cinema, lo Switch Remoto HDMI supporta gli standard HDCP, multi-channel audio e risoluzioni HDTV fino a 1080p. La commutazione avviene per mezzo del tasto sullo switch o con il telecomando a infrarossi.
Manuale d’uso Italiano Modalità d’uso Connettori sul retro 3 2 1 1. Uscita HDMI: utilizzare un cavo HDMI per collegare alla porta HDMI OUT il monitor HDMI 2. Ingressi HDMI: utilizzare cavi HDMI per collegare i dispositivi HDMI alle tre porte HDMI IN sullo switch. 3. Ingresso alimentatore: collegare l’alimentatore da 5V DC in dotazione. Per dispositivi DVI: per collegare dispositivi con connettori DVI, è possibile utilizzare adattatori modulari DVI/HDMI o cavi/adattatori DVI/HDMI.
Manuale d’uso Italiano Soluzione dei problemi Non si vede nessuna immagine sul display. Verificare che lo Switch HDMI e tutti i dispositivi collegati siano accesi. Assicurarsi che tutti i cavi e connettori siano installati correttamente. Se c’è un computer collegato, muovere il mouse o schiacciare un tasto per disattivare la modalità standby. Il telecomando non riesce a comunicare con lo Switch. Se presente, rimuovere la linguetta con scritto ‘Remove this tab’ sul telecomando.
Radio Frequency Energy, Certifications Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Recycling Information WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products United Kingdom In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process.