User guide

LDAC-Pro User Guide
5
Operation
OLED Display
The LDAC-Pro features an OLED display, which allows key information to be clearly viewed from a wide
range of angles. Below is an example of the information provided on the display.
Menu
To enter the menu system press the volume/menu controller dial in, you can then navigate
through the menus below and make selections by turning the dial and pressing the dial to
confirm.
Menu
Sub Menu
Source Selection
HDMI In
USB In
Optical In
Coaxial In
Line In
Front In
Return
SRC Set
Bypass
192 KHz
176.4 KHz
96 KHz
88.2 KHz
48 KHz
44.1 KHz
HDMI Tx Set
Bypass
Input
Return
Display Set
Time Out 5s
Time Out 10s
Time Out 15s
Return
HP Impedance
16 Ω
32 Ω
64 Ω
200 Ω
300 Ω
600 Ω
Return
Reset to Default
OK
Return
Source Selection allows you to choose which of
the 6 available inputs you want to choose.
SRC Set allows you to choose the sample rate you
want to use for the output signal. If you do not want
to use SRC then select Bypass.
HDMI TX Set allows you to choose how the HDMI
Output operates. Bypass allows HDMI audio and
video, Input allows video only, ideal for use with AV
receivers.
Display Set allows you to define the amount of
time before the display reverts to the home screen
after making a selection.
HP Impedance makes it possible to change the
output impedance of the headphone port to best
match the specification of your headphones.
Input Source
Headphone Volume
Input Sample Rate
Output Sample Rate