manual

Introduction
Thank you for purchasing the LINDY USB 3.0 SATA 3.0 Adapter. This versatile adapter allows you to
connect your SATA disk drives to your computers USB 3.0 port, without the need for dedicated drive
housing.
Package Contents
 USB 3.0 SATA 3.0 Adapter with USB 3.0 cable attached
 Multi-Country power supply
 This manual
Features
 Super Speed USB 3.0 Interface
 Compliant to SATA Specification Rev. 3.0
 Supports 2.5”, 3.5” and 5.25” SATA drives
 Compatible with Windows XP/Vista/Win7/Server 2003/2008/RC2 & Linux Kernel 2.6.31 and above
Installation
The LINDY USB 3.0 SATA 3.0 Adapter can be quickly and easily installed on Windows computers.
1. Connect your SATA drive to the USB Adapter.
2. Next connect the USB Adapter to an available USB 3.0 port on your computer.
3. After a short while you will see the Found New Hardware message and Windows will install the
drive.
4. Once Windows has finished installing your drive you will see Your new hardware is installed and
ready to use.
5. Go to My Computer and you will be able to see your newly installed drive.
Disconnecting (Safely Remove Hardware)
Windows
1. Go to your System Tray in the bottom right of your display.
2. Double click on the Safely Remove Hardware icon.
3. You will be presented with a list of devices connected to your PC.
4. Highlight the drive you want to remove and click Stop and then OK.
5. You will then see the Safe To Remove Hardware.
6. You may now remove your drive.
LINDY No. 43119 www.lindy.com
USB 3.0 SATA 3.0 Adapter