User Manual

8
Relay G10 Receiver Details
4
1
5
23
1. Micro USB – Use for primary DC (5VDC /1A) power and
rmwareupdates.
2. Output A – ¼" unbalanced, full performance output intended
todriveaguitar/bassamplier,stompbox,ormulti-eects
input.
3. Output B – XLR balanced, full performance output intended
to connect to a mixing console, PA system, audio interface,
or similar.
4. LED Halo – Multicolor LED halo displays status for transmitter
battery and radio. The halo illuminates white when receiving
a good radio signal from a G10T or G10TII transmitter. The
halo pulses red when the transmitter's battery is below 30
minutes of operating time. A white pulsing halo indicates
that no signal is received from the transmitter.*
5. Transmitter Input – Plug in the transmitter here for charging
and channel selection.
*NOTE: Please also see "G10 Receiver Information" on page
9 for details regarding the system's LED states.