User Manual

3
Getting Started
Using the Relay G10TII Transmitter with a Relay G10 or G10S
Receiver
1. Insert the Relay G10TII transmitter all the way into the receiver
dock to allow the battery to charge. A green steady LED on the
transmitter indicates the transmitter is fully charged.
2. While the G10TII is docked in the receiver, the system scans the
environment and automatically selects the optimal wireless
channel.
The G10S receiver's channel selector must be set to AUTO
for this step.
Relay G10 Relay G10S
3. Insert the G10TII transmitter into your instrument.
4. Connect the receiver to a power source using the power adapter
provided with your device. Connect the Relay G10 or G10S receiver's
1/4" Instrument Output into an amp or FX unit.
Relay G10 Relay G10S