User's Manual

ManualsBrandsLine 6 ManualsModular Microphone ComponentsXD-V75-SC Supercardioid Capsule Kit

Display Manufacturer Model

Line 6 Custom

Shure

SM58

b58

Shure

Beta 58

Shure

SM57

835

Sennheiser

e835

935

Sennheiser

e935

Audio-Technica

AE4100

767

Electro-Voice

N/D767a

Audix

OM5

AKG

Note, In a production using both wired and wireless microphones, the modeling allows the user to select

a wireless mic model that is similar to the majority of wired ones. This selection should help reduce

potential feedback from dissimilar microphone frequency responses when using global EQ settings on

the audio system.

*All product names herein are trademarks of their respective owners, which are in no way associated or afﬁliated with Line 6. These trademarks of

other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6’s sound model

development. SHURE and SM58 are registered trademarks of Shure Incorporated. Sennheiser is a registered trademark of Sennheiser Electronic Corp.

Audix is a registered trademark of Audix Corporation. Audio-Technica is a registered trademark of Audio-Technica Corporation. Electro-Voice is a

registered trademark of Telex Communications, Inc. AKG is a trademark of AKG Acoustics GmbH.

Selecting Equalization Models with the TBP12 Beltpack Transmitter

The TBP12 beltpack transmitter may be used with a wide variety of lavalier, headset, and instrument

microphones, as well as with a quarter-inch instrument cable. Some of these microphones are available

from Line 6; with the correct wiring and a TA4F connector, virtually any mic may be used. To help

the user achieve the best performance from the microphones in a multitude of applications, sets of

equalization models are provided.

Note, See the TA4F wiring instructions in the Appendix at the end of the manual.

To select a particular equalization model for a lavalier, headset, or instrument microphone, press and

hold the

SELECT button until the display changes to the channel setting screen. Quickly press the

SELECT button two more times to go to the [MODEL] page. You will see a three-digit designation for

the currently selected mic EQ model; press the

VALUE button to scroll through the available models

– one per click. The model names will ﬂash. To select one of the models, press the

SELECT button

(the display goes to the next page of selection options) or do not push any buttons for approximately

15 seconds.

Name Application Description

SF1 Speech Filter 1 Gentle high-pass

SF2 Speech Filter 2 Gentle high-pass and high-cut

SF3 Speech Filter 3 Moderate high-pass and high-cut

SF4 Speech Filter 4 Gentle high-pass, mid-cut and high-cut

SF5 Speech Filter 5 Moderate high-pass, mid-cut and high-cut

SF6 Speech Filter 6 Aggressive high-pass, mid-cut and high-cut

IF1 Instrument Filter 1 Guitar cable high frequency roll-off

IF2 Instrument Filter 2 Woodwind instrument enhancement

IF3 Instrument Filter 3 Brass instrument enhancement