User Manual
use.WhenchoosingDSPBypassyou’llgetthebenetofhearingdelay
and reverb trails smoothly decay when disengaging those effects.
Signal Path Routing
1>2>3isstandardoperationwithFXUnit1beingtherstFXinyour
chainandFXUnit3beingthelast.3>2>1reversesthisorderwithFX
Unit3 being the rst andFX Unit 1 beinglast. Hey, whatever oats
your boat!
DIM ON / OFF
Enables the dimly lit footswitch LED’s when effect memories are by-
passed (on) or disables them (off).
Relative / Absolute Pots
InRELmodewhenyouturnaknobtheparameterswillnotjumptothe
position of the knob but change proportionally to the amount of your
parameterknobmovementupordown.WhensettoABSitisnotpos-
sible to make incremental edits of an effect parameter. The parameter
value always adjusts from the current pot position.
FX3:PDL1 LPR:PDL2
FX2:PDL1
FX1:PDL1
Expression PedalsTempo
120 BPM
Tempo
UseTEMPOtomanuallyadjustyourTAPtempofrom30to240BPM
instead of using the
TAP footswitch.
Expression Pedals
The remaining four parameters of this setup page are for Expression
Pedal operation. Download the Advanced User Guide at www.line6.
com/manualsfordetails.
DECAY v1.00
CONTRAST
THRESH
MIDI Gate Display
DUMP EDIT?
CH 1
MIDI,
Use“DUMP” to backup a scene, scene folder or all four folders to your
computer. You can also restore the factory settings. The second param-
eterisforassigningtheMIDIchannelyourM9Stompboxmodelersends
andreceives.GettheAdvancedGuideatwww.line6.comfordetailsand
download the Line 6 Monkey utility software to check for available
upgradesandupdatesoftheM9Stompboxmodelerrmware.
Gate
Think of the Gate as a special additional pedal that applies to each
scene. There is no footswitch control for this effect so only use it when
you always want the gate engaged.
Contrast
This sets the brightness of display.