Firmware, Drivers & Software

29
Creating a Controller Assignment using the Bypass/Control Window
The Edit panel’s Bypass/Control window oers deeper functions for creating and
editing all types of assignments. To follow are steps to create a controller assignment
that utilizes a footswitch or EXP pedal.
1. Double-click on the block within the Signal Flow that includes the parameter
for which you want to create the controller assignment. We’ll choose a Delay
block - Simple Delay model for our example.
2. Choose the Show Bypass/Control command from the main Window menu.
3. Click the Parameter Menu within the Bypass/Control window and choose the
Mix of the Simple Delay.
Parameter
menu
Selecting a Delay's Mix parameter for controller assignment
4. With the Mix parameter selected, click on the desired controller and your
assignment is created. We'll choose EXP 1, but you can alternatively choose
EXP 2, or choose one of your footswitches, which allows you to then congure
a specic parameter value for each of the two states of the footswitch. More
on this in the nal step.
Selecting an EXP 1 pedal controller for controller assignment
5. Once a controller assignment is created, you’ll see its Minimum and Maximum
sliders at the bottom of the Bypass/Control window which allow you to limit
the range of the assigned parameter as you move the pedal from minimum to
maximum position. For our example, we'll set the Max. Mix slider to 50% so that
it achieves a 50% wet/dry Mix balance when our controller is moved to full open.
Minimum and
Maximum sliders
Conguring Min. & Max. options for an EXP Pedal controller assignment
If you have chosen a footswitch as your controller rather than an EXP pedal, you
can similarly congure the Min. and Max. sliders to the specic values you'd like
for the “O” and “On” footswitch states, respectively, for the assigned footswitch.
Close the Bypass/Control window when your settings are complete.
TIP: You can “reverse” the behavior of a controller by setting the Min to 100% and
the Max to 0%, such as to make an assigned Wah pedal work backwards!
Assignments List Window
Within the Edit panel’s Bypass/Control window, when any footswitch, EXP, or
snapshot controller type includes one or more assignments, you’ll see a little button
appear at the top right of the controller item when hovering your mouse cursor over
it. Clicking this button displays the Assignments List window for the controller. For
example, if the FS1 includes multiple assignments, such as bypass assignments for
two blocks, they appear in this window.
The FS1 Assignments List window
This list window oers a handy reference to see all existing assignments per controller,
as well as a few handy features for clearing assignments:
• Click the X button to the left of any individual assignment in the window to
clear it.
• Click the Clear All button to clear all assignments from the selected controller.