User Manual

17
Loading Custom IRs
Loading custom impulse responses requires connecting to the POD Go Edit software
in your Mac or Windows computer. The POD Go Edit application is available as a free
download from line6.com/software.
1. Connect POD Go to your computer via USB and open the POD
Go Edit application.
2. Click the Impulses folder.
Impulses
3. Drag one or more IR les from the desktop or any Finder
window directly into the POD Go Edit app's Impulses list.
POD Go Edit updates the POD Go hardware's IR list automatically.
• Go to the POD Go Edit app's Preferences to set the preferred behavior for
importing Stereo WAV IRs—there you can choose to import the left or right
channeldataofthele,oramixofbothchannelsforthe(mono)IR.
• The imported IR is automatically shortened (or lengthened) to 1,024 samples.
Impulse Response Settings
Knob Parameter Description
1 IR Select
Selects one of the 128 available impulse responses. If a
location contains an IR, its name appears in the inspector
header.
2 Low Cut
Filters a portion of the IR's bass and/or treble frequencies,
which can help remove rumble and/or high-end harshness.
3 High Cut
4 Mix
Blends the IR signal with the dry signal passed through the IR
block. When set to 0%, the path bypasses the IR completely.
When set to 100%, the entire path is fed through the IR, and
no dry signal is heard.
5 Level
Adjusts the overall output level of the IR block. -18.0dB is
normal.
Effects
PODGohasnearlyalltheeectsoftheaward-winningHXfamilyofmodelers,aswell
asselectedeectsfromtheclassicDL4™,DM4™,MM4™,andFM4™stompboxes
and M13
®
, M9
®
, and M5
®
processors.
Distortion Dynamics EQ Modulation Delay Reverb Pitch/Synth Filter Looper
IMPORTANT!Distortion,Dynamics,andPitch/Syntheectsareallmono.EQ,
Modulation,Delay,Reverb,andFiltereectsareallstereo.TheLoopercanbe
selected as either mono or stereo. Because of this, if you place a distortion
(mono only) after a delay or reverb (stereo only), your stereo signal will be
collapsed to mono at the distortion block. (Note than Amp/Preamp and Cab/
IR blocks are mono as well.)
From Edit view, turn the Upper Knob to select one of the four
effects blocks and then turn the Lower Knob to change its model.
Distortion Models (Mono)
Model Based On*
Kinky Boost
Xotic
®
EP Booster
Deranged Master
Dallas Rangemaster Treble Booster
Minotaur
Klon
®
Centaur
Teemah!
Paul Cochrane Timmy
®
Overdrive
Heir Apparent
Analogman Prince of Tone
Alpaca Rouge
Way Huge
®
Red Llama
Compulsive Drive
Fulltone
®
OCD
Dhyana Drive
Hermida Zendrive
Valve Driver
Chandler Tube Driver
Top Secret OD
DOD
®
OD-250
Scream 808
Ibanez
®
TS808 Tube Screamer
®
Hedgehog D9
MAXON
®
SD9 Sonic Distortion
Stupor OD
BOSS
®
SD-1 Overdrive
Deez One Vintage
BOSS
®
DS-1 Distortion (Made-in-Japan)
Deez One Mod
BOSS
®
DS-1 Distortion (Keeley modded)
*See "U.S. Registered Trademarks" on page 25.AllproductnamesusedinthisdocumentaretrademarksoftheirrespectiveownersandneitherYamahaGuitarGroupnorLine6areassociatedoraliatedwiththem.
These trademarks appear solely to identify products whose tones and sounds were studied by Line 6 during sound model development.