User Manual

29
Manual Bypass/Control Assignment
1. Press PAGE and PAGE together to open the Menu.
2. Press Knob 1 (Bypass/Control).
The Bypass/Control screen looks very similar to the Edit screen:
1
Bypass/Control
Distortion Heir Apparent
Bypass
Parameter Learn
Footswitch 1
Switch
3. Turn the Upper Knob to select the block you want to control.
4. Turn Knob 1 (Parameter) to choose the type of parameter you
want to control.
Input and Output blocks cannot be bypassed, but their parameters can be
assigned to controllers.
When Knob 1 (Parameter) is set to "Bypass," turn Knob 2
(Switch) to select the desired footswitch or expression pedal
to turn the block on and o.
None
Removes the bypass assignment.
FS1-FS8
Steppingonthe Stomp modefootswitchturnstheblock onando.
Note that FS7 or FS8 won't function unless Global Settings > Switches/
Pedals > EXP 2 FS7/8 is set to "FS7/8."
EXP 1, EXP 2
Movingtheexpressionpedalautomaticallyenables(orbypasses)the
block.
Selecting EXP 1 or 2 displays Knob 3 (Position) and Knob 4 (Wait).
Positiondetermines wherein theexpression pedal'stravel theblock
is enabled or bypassed. 0% is heel down; 99% is toe down. Wait
determines how long POD Go waits before bypassing the block; for
example,youwouldn'twantthewahtoturnoeverytimeyoutouched
the heel down position in your big funk wah solo.
TIP:Bydefault,bypasstogglingfortheblockviaEXP1orEXP2iscongured
for"heeldown=o"behavior.Toreversebypassbehavior,presstheUpper
Knob (bypass). In such case, the block will be bypassed when moving the
expressionpedalpasttheconguredPositionlocation.Sinceitispossible
tocongurethebypassofmultipleblockstobeassignedtoanexpression
pedal,youcanseteachblock'sPositionvaluedierently-therebyallowing
thepedaltoturnsomeblocksonandothersoatdierentpositionsinthe
pedal's travel.
When Knob 1 (Parameter) is set to anything but "Bypass,"
turn Knob 2 (Controller) to select the desired footswitch or
expression pedal.
None
Removes the controller assignment.
EXP 1 or 2
Expressionpedalsarethemostcommontypeofcontroller,used
to control volume, wah, pitch wham, etc.
FS1-FS8
Stepping on a Stomp mode footswitch can toggle between a
parameter'sminandmaxvalues.
Snapshot
Although all controller-assigned parameters are updated per
snapshot, an additional "Snapshots" controller is available when
other controllers are already used.
If desired, turn Knob 3 (Min Value) and Knob 4 (Max Value) to
set the range you wish to control.
TIP: To reverse controller behavior, swap the min and max values.
5. Press to return to the Home screen.
Clearing a Block's Assignments
Clearing a block's assignments clears both its footswitch (bypass) assignment and
any of its parameters' controller assignments.
1. From the Bypass/Control screen, select the block whose
assignments you want to clear and press ACTION.
2. Press Knob 1 (Clear Assign).