User's Manual
Table Of Contents
31
Global EQ
The Global EQ built into POD Go has three fully parametric bands plus variable low
andhighcutlters,andisusedforcompensatingforthewidedisparityinacoustic
environments on tour or when traveling from studio to studio.
NOTE: Global EQ is applied to all presets and is only heard from the MAIN OUT
and PHONES outputs; it is never heard from the Amp Out or USB outputs.
1. Press PAGE and PAGE together to open the Menu.
2. Press Knob 4 (Global EQ).
The Global EQ screen appears:
GLOBAL EQ OFF
GLOBAL EQ ON
Global EQ
Low
Freq Q Gain
0.7110 Hz 0.0dB
Global EQ
Low
Freq Q Gain
0.7110 Hz 0.0dB
3. Press the Upper Knob to turn Global EQ on and o.
4. Turn the Upper Knob to select the desired EQ band—Low Cut,
Low, Mid, High, or High Cut.
5. Turn Knobs 1-3 to adjust the selected EQ band.
Resetting Global EQ
ResettingtheGlobalEQreturnsitssettingstofactorydefault(at).
1. From the Global EQ screen, press ACTION.
2. Press Knob 1 (Reset EQ).
The following dialog appears:
Freq
110 Hz
Cancel OK
Reset Global EQ?
3. Press Knob 5 (OK).