User's Manual

33
Global Settings > Preferences
Page Knob Parameter Description
1
1 Link Amp/Cab
Determines whether or not changing the Amp/Preamp block's model will automatically change the Cab block's model to match.
2 Snapshot Edits
Determineswhetherornotanyeditsmadetoasnapshot(blockon/o,parametercontrol,tempo)arerememberedwhenreturningtothat
snapshot. When set to "Recall," any snapshot edits are recalled when jumping from snapshot to snapshot, and appear as you last left them. When
set to "Discard," any snapshot edits are discarded when jumping from snapshot to snapshot, and appear as the preset was last saved. If you want
to save changes made to a snapshot while Snapshot Edits is set to "Discard,” press and ACTION together twice before selecting another.
3 Tempo Pitch
DetermineshowdelayrepeatssonicallybehavewhenrepeatedlypressingTAP."Authentic"respectsthenaturalpitchuctuationsinherentwhen
changing a real delay pedal's time knob; "Transparent" minimizes these artifacts.
Global Settings > Switches/Pedals
Page Knob Parameter Description
1
1 Stomp Block Sel
Determines whether pressing a Stomp mode footswitch automatically selects the assigned block for editing.
2 FS Auto Assign
DetermineswhethernewlyaddedeectsblocksareautomaticallyassignedtounusedStompmodeswitchesforblockbypass.Whensetto
"O,"youmustmanuallyassignblockstofootswitches.
3 Stomp Mode
By default, Stomp footswitch mode displays 6 stomps. You may also choose "4 Switches", which replaces FS1 and FS4 with and
switches, so you can access preset banks and snapshots from without leaving Stomp mode.
4 Snapshot Mode
When set to "Auto Return," POD Go returns to Preset mode after selecting a snapshot. When set to "Manual," POD Go stays in Snapshot
mode until pressing MODE/EDIT/EXIT. When set to "Toggle," pressing and toggles between Preset and Snapshot footswitch modes and
POD Go remembers this state even after switching to Stomp mode.
5 Up/Down Switches
When set to "Presets" or "Snapshots," and change to PRESET / or SNAPSHOT / , where pressing either switch instantly
selectsthenext/previouspresetorsnapshot,withoutabankqueue.Thisisusefulifyou'veprogrammedaxedsetlistforyourshowand
just want to increment through presets or snapshots. SHORTCUT: At any time, press and hold both and to cycle through BANK / ,
PRESET / , and SNAPSHOT / .
2
1 EXP 2 FS7/8
DetermineswhethertheEXP2|FOOTSWITCH7/8jackactsasanExpressionPedal2input—or—adualfootswitchinputforaddingtwo
additional stomp switches.
2 EXP 1 Polarity
lfyourexternalexpressionpedalappearstoworkbackwards—forexample,aVolumepedalblockisloudestwiththeheelallthewaydown—
set this to "Inverted."
3 EXP 2 Polarity
4 EXP 1 Position
DetermineswhetherthePODGoexpressionpedalpositionsarerecalledpersnapshot,perpreset,orappliedglobally.IfyouwantaVolume
Pedal or Wah to maintain its position when switching presets, set this to "Global."
5 EXP 2 Position
3
1 Switch LEDs
DetermineswhethertheStompmodefootswitches'coloredLEDringsappeardimwhenbypassed("Dim/Lit"),orowhenbypassed("O/Lit").
Whenplayinginbrightsunlight,youmaywanttosettothisto"O/Lit"toincreasecontrast.
2 Tap Display
DetermineshowtheTempoisdisplayed."LEDFlash"ashestheredTAPLED,"TempoPanel"openstheTempoPanelwhensteppingonTAP
while in Edit View, and "LED+Panel" does both.
*ForconnectinganexternalfootswitchtoaccessStomps7and8,theuseofamomentary(unlatched)typefootswitchisrecommended.