User's Manual

5
1. Main Display This color LCD is your window into the power of POD Go.
2. VIEW If you ever get lost, press this button to return home. Press again
to toggle between the two main Home views—see "Play View" and "Edit View".
3. ACTION Press this button to open the action panel for the selected block or
menu. From Edit view, the action panel lets you move, copy, and paste blocks.
Othermenusmayhaveuniqueactionpanels;forexample,theGlobalSettings
action panel lets you reset all global settings at once.
Press
and ACTION together to open the Save menu for renaming and saving
changes to a preset. Press both buttons twice to quick save. See "Saving/Naming
a Preset".
4. Upper Knob In Play view, turn this knob to select a preset. Press this knob to
open the preset list. In Edit view, turn this knob to select a block for editing. Press
this knob to bypass/enable the selected block.
5. Lower Knob In Edit view, turn this knob to change the current block's model.
Press this knob to open the model list. See "Choosing a Block's Model".
6. PAGE/PAGE Press to view more parameters for the selected block or
menu. Press both
PAGE and PAGE to dive deeper into POD Go, and you'll
ndBypass/Control,GlobalEQ,andGlobalSettingsmenus.
7. VOLUME Turn this knob to control the main output and headphones volume.
8. WAH/EXP 1, VOL/EXP 2 LEDs These tell you whether the built-in
expressionpedalisactingasEXP1(red)orEXP2(green).Bydefault,theWah
block is assigned to EXP 1 and the Volume Pedal block is assigned to EXP 2.
9. Knobs 1-5 Turnoneoftheveknobsbelowthemaindisplaytoadjustthe
parameter's value; press the knob to reset the parameter's value. To assign the
parameter to snapshot control, press and turn the knob; the value will appear
white and in brackets. If a rectangular button appears above a knob, press the
knob to engage its function.
SHORTCUT: For most time-based parameters such as delay time or
modulation speed, press the knob to toggle between setting the value in ms
or Hz and note divisions (1/4-note, dotted 1/8-note, etc.).
SHORTCUT: Controllers can be assigned to most parameters. Press and
hold a parameter’s knob to quickly jump to the "Bypass/Control" page for
that parameter.
10. Expression Pedal Movetheexpressionpedaltocontrolvolume,wah,ora
customizedcombinationofampand/oreectsparameters.Activatethehidden
toe switch to toggle between EXP 1 and EXP 2. (The LEDs tell you which one is
active.)IfanexternalpedalisconnectedtotherearpanelEXP2jack,thebuilt-in
pedal becomes EXP 1 only. See "Bypass/Control" for more information.
11. Footswitches 1-6 ThesixfootswitchesbelowtheLCDhavecoloredLED
rings that tell you the current state of the assigned block or its function. See "Play
View" for more information.
SHORTCUT: While in Stomp footswitch mode, press and hold two switches
to swap all assignments between them.
12. MODE/EDIT/EXIT Switch Press MODE to toggle between Stomp and
Presetfootswitchmodes.PressMODE/EDIT/EXITtoexitSnapshotor6Switch
Looper modes.
13. TAP/TUNER Switch Press TAP two or more times to set the BPM (beats per
minute)ofanytempo-basedeects,suchasdelayormodulation.PressTAPonce
torestartanyLFO-basedmodulationeects.HoldTAPforonesecondtoopen
the Tuner. See "The Tuner".