User's Manual

7
Quick Start
Hooking It All Up
There are many ways to connect POD Go to other gear, and the following pages
illustrate only a few.
POD Go with an Amp and/or Powered Speakers
Depending on how complex your tones are, POD Go may be able to act as your
entire processing rig, providing amp modeling, cab modeling or cab IRs (Impulse
Responses),eects,looping,andevenatuner.
When connecting POD Go to a powered speaker (or two powered speakers in stereo),
set the main outputs to line level. See "Global Settings > Ins/Outs".
Youcanconnectanadditionalexpressionpedalormomentaryfootswitch—orwithaY
cable, two momentary type footswitches—to the POD Go EXP 2 | FS 7/8 jack.
AMP
OUT
OR
Y-CABLE
AND
/OR
MAIN
OUT
TIP: The Line 6 Powercab
®
and Powercab Plus active guitar speaker systems
arespecicallydesignedforusewithtoday'smodelers—andexcellentforuse
with your POD Go! Please see line6.com/powercab for details.
POD Go in the Studio
POD Go also includes a multichannel USB audio/MIDI interface for your production
studio. It can re-amp, or use USB audio streams to process tracks or busses in your
DAW (Digital Audio Workstation) after they're recorded. See "USB Audio/MIDI" for
more information.
MAIN
OUT
USB
POD Go in 4-Cable Method
"4-CableMethod"isapopularandexiblewayofhookingthingsup,allowingyou
toroutesomeeectsblocks(mostoftendrives,distortions,wahs,andcompressors)
beforeyourrealamp'spreampandothereectsblocks(oftentime-basedeectslike
delaysandreverbs)initseectsloop.
Pop quiz: How many cables should be used in a 4-Cable Method setup?
#yougetnopoints
IMPORTANT! Make sure you add a Send/Return > Mono FX Loop block at the
pointinyoursignalowwhereyouwishyourexternalamp'spreamptobe.And
don't forget to bypass the POD Go Amp/Preamp and Cab/IR blocks!
TIP: 4-Cable Method really shines when you assign the FX Loop block (active)
and Preamp block (bypassed) to the same footswitch. Press the switch to
instantlytogglebetweenyourexternalamp'spreampsectionandanymodeled
preamp in POD Go.
GUITAR
IN
AMP
SEND
AMP
RETURN
MAIN OUT
/MONO
RETURN
SEND
GUITAR IN