User's Manual

6
Xd-V55 digital WiReless Quick setuP
Receiver
6
7
1
2 3
4 5
CHANNEL
1
2
3
4
5
67
8
9
10
11
12
BATTERY
TRANSMITTER
STATUS
MUTE
AUDIO RF
MAIN OUTS
UNBAL BALANCED
9VDC IN
1. Antenna A & B Input Connectors (BNC)
2. Unbalanced 1/4-Inch and Balanced XLR Audio Output Connectors
3. 9VDC Power Input Connector
4. Transmitter Status LED Displays
AUDIO
– lights green to indicate audio signal level, top clip LED lights red to indicate the audio
is clipping
MUTE – lights red when transmitter is muted
BATTERY – lights green, with all lit indicating full transmitter battery; bottom LED turns red
when 1 hour remains, and flashes red when less than 40 minutes remains
RF – lights green to indicate transmitter signal strength/quality; with transmitter off, red lights
indicate interference on that channel
5. Channel Select Encoder – selects channels 1 through 12
6. Dynamic Filter Button – engages dynamic filter to reduce stage and handling noise
7. Receiver Power Switch
Plug the power supply cable into the receiver and AC power. Connect and position the antennas.
Connect with an audio cable to a mixer or similar. Turn on the receiver power switch. Turn the
Channel
Select Encoder to select a channel. Press the Dynamic Filter Button if desired. The receiver is ready
to use