Product Datasheet/Brochure
Table Of Contents
10
Stomp Mode
Stomp mode is where you'll spend most of your time, as it most closely resembles the
feel and behavior of a traditional pedalboard.
While in Stomp mode, footswitches 1-6 can each do a number of things:
• Toggle one or more eects on and o
• Toggle between two values of one or more parameters
• Generate a MIDI message or switch channels on an external amp
• All of the above, even simultaneously
If not already there, press MODE to select Stomp mode.
Footswitches 1-6 display any assigned eects, parameter names, Command Center
messages, and/or custom labels:
Minotaur
Looper
Harmony Delay
Feedbk KeyTime
Ubiquitous Vibe
3 OSC Synth
Particle Verb
Bypassing an Effect
Press the assigned switch.
Bypassed eects display grayed out text and a dim LED ring:
Minotaur
NOTE: Although most people will assign one eect per footswitch, the HX Ef-
fects hardware lets you turn multiple eects on and o simultaneously—or even
toggle between two or more eects—with a single footswitch. Assigning more
than one eect to the same footswitch is accomplished from the Signal Flow
menu. See "Assigning Switches in Signal Flow View"
Bypassing All Effects
1. Press MODE and TAP simultaneously.
While the HX Eects device is completely bypassed, a warning dialog slowly
jumps across all six scribble strips:
DSP bypass!
Press MODE + TAP
DSP BYPASS
Analog bypass!
Press MODE + TAP
ANALOG BYPASS
NOTE: There are two types of All Bypass for the HX Eects device: Analog
bypass (sometimes called "true bypass"), where mechanically switching
relays route your signal directly from the inputs to the outputs with no pro-
cessing or A/D/A conversion, and DSP bypass, where any delay echoes and
reverb tails decay naturally. By default, the HX Eects hardware is set for
Analog bypass, but this behavior can be set from "Global Settings > Prefer-
ences"
2. Press MODE and TAP simultaneously again.
The HX Eects device returns to normal operation.