Product Datasheet/Brochure
Table Of Contents
11
Choosing an Effect
To change an existing effect, briefly touch its footswitch and then
turn the Big Knob.
To add an effect to an empty footswitch, briefly touch the switch
and then turn the Big Knob.
Selecting eects within the same category—say, changing a Simple Delay to a Re-
verse Delay—can be very quick. However, as the HX Eects device has almost 200
models to choose from, using this method to change a mono distortion (beginning of
the list) into a stereo looper (end of the list) is very slow. Instead, you should open the
model list:
1. From Stomp mode, press the Big Knob to open the model list:
EQ
DLY
Modulation
Delay
Transistor Tape
Bucket Brigade
Cosmos Echo
SUBCATEGORYCATEGORY MODEL
Mono
Stereo
Legacy
DLY DLY
Eects categories include one or more subcategories. Eects in the "Mono" and
"Stereo" subcategories are HX (Helix) models. Eects in the "Legacy" subcat-
egory are taken from classic Line 6 pedals, including M13, M9, M5, DL4, MM4,
FM4, and DM4.
NOTE: Stomp switches with stereo or legacy models display small identier
icons to the right of the model name:
STEREOMONO LEGACY
Particle VerbUbiquitous VibeUbiquitous Vibe
Turn the Big Knob to select items in a list.
Press the Big Knob (or ) to view a category or subcategory’s contents.
Press to go back one level.
IMPORTANT! If certain items don't appear within the model list, this
means the HX Eects device cannot accommodate that category, sub-
category, or model. For example, if you've already added three reverbs
and a pitchshifter, you may not be able to add another pitchshifter.
2. Using the Big Knob, , and , select the desired category, sub-
category, and model.
3. To close the model list, press .
Editing Effects
1. To select an eect for editing, briey touch its footswitch.
The rst three parameters appear and the scribble strip displays white brackets,
indicating its parameters are controlled by the knobs:
Harmony Delay
Feedbk KeyTime
2. Turn Knobs 1-3.
Harmony Delay
Feedbk KeyTime
Minotaur Ubiquitous Vibe
1 2 3
ACTION
SAVE
While adjusting parameters, their values briey appear on the scribble strip:
Feedbk KeyTime
50% A750ms
If an eect or other item has more than three parameters, arrows appear to the
right and/or left of the value bars (see above).
SHORTCUT: For most time-based parameters such as delay time or modu-
lation speed, press the knob to toggle between setting the value in ms or Hz
and note divisions (1/4-note, dotted 1/8-note, etc.).
3. Press or to access more parameters (if available).