Product Datasheet/Brochure

12
TIP: Touch a stomp switch for one second to spill all parameters across
multiple scribble strip LCDs to view them more easily:
Feedbk KeyTime
50% A750ms
Mix LevelScale
50% 0.0dBMajor
V1 Lvl V1 PanV1Shft
10.0 Left50+2
Low Cut Hi CutRtPan
Off OffCenter
V2 Scal RootV1 Scal
66% 10.033%
V2 Lvl V2 PanV2Shft
10.0 Right50+4
Touch the desired footswitch to select its parameters and then turn
knobs 1-3 to adjust them. If a block has more than 18 parameters,
press to access more parameters. When nished, touch a switch for
one second (or press ) to exit.
Hands-Free Editing (Pedal Edit)
Eects can be edited without taking your hands o the guitar. If you hate having to
reach down and twist knobs, Pedal Edit mode will be your new best friend. Although
Pedal Edit is not intended to replace proper controller assignment, in a pinch, it can
also be used to tweak one parameter at a time during a performance.
1. Hold MODE (EDIT) for two seconds.
The preset's processing blocks appear on the footswitches, ashing. If the preset
has more than six blocks, FS3 displays "MORE..." Press FS3 (MORE...) to view
more blocks.
NOTE: Selecting a block in Pedal Edit mode may not correspond to any
footswitch assignment it may have.
2. Press the switch of the eect you want to edit.
The block's rst page of parameters appear on footswitches 1-3:
PAGE
VALUE
–
VALUE
+
HOLD TO PAGE
23%
Dwell
Stable
Conditn
52%
Mix
If the eect has more than one page of parameters, press FS4 (PAGE >) until you
nd the parameter. To go back one page, press and hold FS4.
3. Press the footswitch displaying the parameter you want to ad-
just.
Press and hold a Time or Speed switch to toggle between setting the value in ms
or Hz and note divisions (1/4-note, dotted 1/8-note, etc.).
Press and hold any other parameter switch to reset its value to default.
4. Use a connected expression pedal to adjust the parameter's
value.
For ne adjustment, press FS5 (VALUE–) and FS6 (VALUE+). Hold FS5 (VAL-
UE–) or FS6 (VALUE+) for faster adjustments.
5. When nished, press MODE (EXIT).
If you want to save any changes made to the preset, hold MODE (EXIT) for two
seconds.