Product Datasheet/Brochure

22
Send Settings
Knob Parameter Description
1 Send
Adjusts the level sent to your external devices.
2 Dry Thr
Adjusts the level of the signal passed through the Send block,
independent of the Knob 1 (Send) level. Normally, this should
be set to 0.0dB.
Return Settings
Knob Parameter Description
1 Return
Adjusts the level received at the Return jack.
2 Mix
Blends the Return signal vs. the dry signal passed through the
Return block. When set to 0%, the path bypasses the Return
completely. When set to 100%, the entire signal is fed from the
Return, and no dry thru signal is heard.
FX Loop Settings
Page Knob Parameter Description
1
1 Send
Adjusts the level sent to your external device.
2 Return
Adjusts the level received at the Return jack.
3 Mix
Blends the FX loop signal vs. the dry signal passed
through the FX Loop block. When set to 0%, the path
bypasses the FX loop completely. When set to 100%,
the entire path is fed through the FX loop, and no dry
thru signal is heard.
2 1 Trails
Trails O: An external stompbox would be instantly
muted when the FX Loop block is bypassed. Trails On:
An external delay or reverb stompbox would continue to
decay naturally when the FX Loop block is bypassed or
a dierent snapshot is selected.
Looper
The HX Eects device can add one mono or stereo Looper block per preset.
The Looper can exist anywhere on either Path 1 or Path 2.
Looper footswitch mode is only available if a Looper block has been assigned to a
footswitch in Stomp mode. Many factory presets include a Looper block already as-
signed to a footswitch, but your custom presets may not.
Looper Type Max. Loop Length (1/2 Speed) Max. Loop Length (Full Speed)
Mono
120 seconds 60 seconds
Stereo
60 seconds 30 seconds
1. From Stomp mode, press the footswitch labeled “Looper” (if
available).
Looper mode appears:
UNDO
ONCE
REV
FWD
FULL
S P E E D
1/2