Product Datasheet/Brochure
Table Of Contents
36
Bank/PC (Program Change)
Page Knob Parameter Description
1
2 MIDI Ch
Sets the Bank/Program message's MIDI channel (1-
16). When set to "Base," the HX Eects device fol-
lows the Global MIDI channel, which is set from the
"Global Settings > MIDI/Tempo" page.
3 CC00
Sets the CC#00 (Bank MSB) value. Select "O" if the
receiving device shouldn't respond to Bank MSB.
2
1 CC32
Sets the CC#32 (Bank LSB) value. Select "O" if the
receiving device shouldn't respond to Bank LSB.
2 Prog[ram]
Sets the Program Change (PC) value. Select "O" if
you only want to send a Bank MSB and/or Bank LSB
message.
Note On
Page Knob Parameter Description
1
2 MIDI Ch
Sets the note's MIDI channel (1-16). When set to
"Base," the HX Eects device follows the Global
MIDI channel, which is set from the "Global Settings
> MIDI/Tempo" page.
3 Note
Sets the MIDI note value (C-1 ~ G9). Middle C is C3.
2
1 Velcity
Sets the MIDI note's velocity (0-127).
2 NoteO
Determines whether the MIDI note sustains until
pressing the switch again (Latching) or sustains only
while the switch is held (Momentary).
MMC (MIDI Machine Control)
Knob Parameter Description
2 Messge
Determines the message type.
Ext Amp
Knob Parameter Description
3 Select
Determines the Ext Amp connection [1 (Tip-to-sleeve), 2
(Ring-to-sleeve), or both] for switching an external amp's
channel, reverb, or other functions. Only works when
"Global Settings > Preferences" > EXP 2/EXT AMP is set to
"EXT AMP."*
*IMPORTANT! Connect EXT AMP 1/2 only to ampliers that utilize "short-
to-sleeve" footswitch inputs. Connecting to any other sort of input could
cause permanent damage to both your amp and the HX Eects device! If
you're not sure if your amp has short-to-sleeve inputs, contact the manu-
facturer.
IMPORTANT! Your ability to control external amp channel and/or reverb
switching with the HX Eects device has been tested with many popular
amps and heads. Unfortunately this does not guarantee compatibility with
all products. Note that, depending on the circuitry of the channel switch-
ing jack in the guitar amp used, the EXT Amp function may not operate as
expected.
NOTE: At this time, Ext Amp control messages are not transmitted per snap-
shot when assigned to an instant command; only when assigned to a foot-
switch.