Product Datasheet/Brochure

37
Copying and Pasting a Command
1. Turn the Big Knob to select the source containing the com-
mand you wish to copy and press ACTION.
2. Press the COPY COMMAND switch.
3. Select the destination to which you want to paste the com-
mand—even in a dierent preset—and press ACTION.
4. Press the PASTE COMMAND switch.
Copying and Pasting All Commands
Setting up the same or similar set of Command Center commands across multiple
presets can quickly become tiresome. Fortunately, the HX Eects device lets you
quickly copy and paste all commands to another preset.
1. From the Command Center page, press ACTION.
2. Press the COPY ALL COMMANDS switch.
3. Select the preset to which you want to paste the commands
and press ACTION.
4. Press the PASTE ALL COMMANDS switch.
Clearing a Command
1. Select the source containing the command you want to clear
and press ACTION.
2. Press the CLEAR COMMAND switch.
Clearing All Commands
1. From the Command Center page, press ACTION.
2. Press the CLEAR ALL COMMANDS switch.
The following dialog appears:
OKCANCEL
Clear all Command
Center assignments?
3. Press the OK switch.
TIP: Be sure to SAVE your preset after adding, editing or clearing Command
Center commands to retain your changes.