Product Datasheet/Brochure

40
Global Settings > Switches
Page Knob Parameter Description
1
1 Stomp Select
When set to "Touch," touching a Stomp mode switch selects its assigned item(s) but pressing doesn't. When set to "Press," pressing a Stomp
mode switch selects its assigned item(s) but touching doesn't (helpful if you insist on playing barefoot). When set to "Both", either touching or
pressing will select the assigned item.
2 Stomp Mode
By default, Stomp footswitch mode displays 6 stomps. You may also choose "4 Switch", which replaces FS1 and FS4 with and switches.
3 Preset Mode
When set to "Moment[ary]," the HX Eects device returns to Stomp mode as soon as a Preset (or Snapshot) switch is pressed. When set to
"Latch[ing]," the HX Eects device stays in Preset (or Snapshot) mode and the user must press MODE to switch back to Stomp mode.
2
1 Snpsht Mode
When set to "Moment[ary]," the HX Eects device returns to Preset mode (or Stomp mode if Pg 1 > Knob 3 [Preset Mode] is set to "Moment[ary]") after select-
ing a snapshot. When set to "Latch[ing]," the HX Eects unit stays in Snapshot mode until pressing + to return to Preset mode (or MODE/EDIT/EXIT to
return to Stomp mode).
2 Up/Dn Switch
When set to "Preset" or "Snapsht," FS1 (BANK ) and FS4 (BANK ) change to PRESET / or SNAPSHOT / , where pressing either
switch instantly selects the next/previous preset or snapshot, without a bank queue. This is useful if you've programmed a xed set list for
your show, and just want to increment through presets or snapshots. At any time, press and hold both FS1 ( ) and FS4 ( ) to cycle through
BANK / , PRESET / , and SNAPSHOT / .
Global Settings > Pedals
Page Knob Parameter Description
1
1 EXP 1 Polrity
lf your external expression pedal appears to work backwards—for example, a Volume pedal block is loudest with the heel all the way down—set
its polarity to "Invert."
2 EXP 2 Polrity
3 EXP 1 Position
Determines whether each expression pedal position is recalled per snapshot, per preset, or applied globally. If you want a Volume Pedal or Wah to
maintain its position when switching presets, set this to "Global."
2 1 EXP 2 Position