Product Datasheet/Brochure

41
Global Settings > MIDI/Tempo
Page Knob Parameter Description
1
1 MIDI Base Ch
Sets the system base MIDI channel that the HX Eects hardware uses for both receiving and sending MIDI communication via MIDI and USB. Note
that MIDI messages assigned from the Command Center page can be set to any MIDI channel.
2 MIDI Thru
When on, MIDI OUT also acts as a MIDI THRU; that is, it passes through any MIDI messages received at the MIDI IN jack.
3 Rx MIDI Clock
Determines whether the HX Eects device responds to incoming MIDI beat clock received at its MIDI IN port, via USB, or whichever it senses rst
("Auto"). If you don't want your HX Eects device to respond to MIDI clock at all, set this to "O."
2
1 Tx MIDI Clock
Determines whether the HX Eects device transmits MIDI beat clock from its MIDI OUT port, via USB, or both. If you don't want your HX Eects
device to transmit MIDI clock at all, set this to "O."
2 Tempo
Choose whether the Tap Tempo value is stored and recalled with each snapshot, recalled with each preset, or is applied globally across all presets
and snapshots.
3 BPM
Depending on the Knob 2 (Tempo) setting, this value is saved per snapshot, per preset, or globally.
3
1 USB MIDI
When on, the HX Eects device receives and transmits MIDI data via USB in the same capacity as its MIDI jacks.
2 MIDI PC Rx
Determines whether the HX Eects device responds to incoming MIDI program change (PC) messages from its MIDI IN port, via USB, or both MIDI
and USB. If you don't want your HX Eects device to respond to PC messages at all, set this to "O."
3 MIDI PC Tx
Determines whether the HX Eects device automatically sends MIDI program change (PC) messages from its MIDI OUT port, via USB, or both MIDI
and USB when selecting presets. This setting does not aect the sending of any MIDI commands manually assigned from the Command Center
page.
Global Settings > Displays
Knob Parameter Description
1 LED Ring
Determines whether the Stomp mode footswitches' colored LED rings appear dim when bypassed ("Lo/Brt"), or o when bypassed ("O/Brt"). When
playing in bright sunlight, you may want to set to this to "O/Brt" to increase contrast.
2 Tap LED
If you'd prefer to not see the red TAP footswitch LED constantly ashing, you can turn it o.