Product Datasheet/Brochure

43
Snapshot Recall via MIDI
To recall a snapshot, send the HX Effects hardware a CC69 mes-
sage according to the table below.
Snapshot MIDI CC# Value
1
69 000
2
69 001
3
69 002
4
69 003
Block Bypass via MIDI
1. Press to open the Menu.
2. Press the SIGNAL FLOW switch.
3. Turn the Big Knob to select the block for which its bypass you
want to assign to incoming MIDI.
4. Press and turn Knob 3 (MIDI Bypass) to assign an incoming
MIDI CC message to turn the block on and o.
Incoming CC values 0-63 turn the block o; values 64-127 turn the block on. Note
that some MIDI CCs are reserved for global functions and cannot be selected.
Parameter Control via MIDI
1. From Stomp mode, press and hold the knob for the parameter
you wish to control.
The HX Eects device jumps to the Controller Assign page and displays your
parameter at Knob 1 (Parameter).
2. Press the LEARN switch and then send a MIDI CC message
from your foot controller, keyboard, etc.
The CC number appears above Knob 3 (CC#).
NOTE: To manually select a MIDI, turn Knob 2 (Controller) to select "MIDI
CC" and Knob 3 to the desired MIDI CC number.
3. If desired, press and turn Knob 1 (Min Value) and Knob 2
(Max Value) to set the range you wish to control.
TIP: To reverse controller behavior, swap the min and max values.
4. Press to return to the Home screen.
MIDI CC
The HX Eects hardware has reserved specic MIDI CC messages for global func-
tions; these CCs cannot be used as controllers. If you attempt to learn a CC message
reserved for global functions (see "Controller Assign"), the following dialog appears:
This MIDI CC is used
for global functions!
MIDI CC# Value Function
Pedal and Footswitch Assignments
1
0-127 Emulates EXP 1 Pedal
2
0-127 Emulates EXP 2 Pedal
49
0-127 Emulates Stomp footswitch mode's FS1
50
0-127 Emulates Stomp footswitch mode's FS2
51
0-127 Emulates Stomp footswitch mode's FS3
52
0-127 Emulates Stomp footswitch mode's FS4
53
0-127 Emulates Stomp footswitch mode's FS5
54
0-127
Emulates Stomp footswitch mode's FS6
Looper Controls
60
0-63: Overdub;
64-127: Record
Looper Record/Overdub switch (FS4)
61
0-63: Stop;
64-127: Play
Looper Play/Stop switch (FS5)
62
64-127 Looper Play Once switch (FS6)
63
64-127 Looper Undo switch (FS1)
65
0-63: Forward;
64-127: Reverse
Looper Forward/Reverse switch (FS3)
66
0-63: Full;
64-127: Half
Looper Full/Half Speed switch (FS2)
67
0-63: O;
64-127: On
Looper block on/o (if available); also enters/exits
Looper footswitch mode