Product Datasheet/Brochure

6
1. SAVE Press this button to open the Save menu for renaming and saving chang-
es to a preset. Press twice to quick save. See "Saving/Naming a Preset"
2. Press this button to dive deeper into the HX Eects device, and you'll nd
Signal Flow, Controller Assign, Command Center, and Global Settings menus.
3. If you ever get lost, press this button to return home.
4. BIG KNOB From Stomp footswitch mode, turn this knob to change the se-
lected block's eect. Press the Big Knob to open the model list. See "Choosing
an Eect" From Preset footswitch mode, turn the Big Knob to select presets. See
"Preset Mode"
5. Knobs 1-3 Turn one of the three smaller knobs to adjust parameters for the
selected LCD (the one anked in white brackets); press the knob to reset the
parameter's value.
SHORTCUT: For most time-based parameters such as delay time or modu-
lation speed, press the knob to toggle between setting the value in ms or Hz
and note divisions (1/4-note, dotted 1/8-note, etc.).
SHORTCUT: Controllers can be assigned to most parameters. Press and
hold a parameter’s knob to quickly jump to the "Controller Assign" page for
that parameter.
6. ACTION Press this button to open the action panel for the selected block or
menu. From Stomp footswitch mode, the action panel lets you copy/paste/clear
eects and customize the footswitch's label and LED color. Other menus may
have unique action panels. For example, the Global Settings action panel lets you
reset all global settings at once.
7. / If the selected model or item has more than one page of parameters, ar-
rows appear in the lower left and/or right corner of its LCD. Press or to view
more parameters. In the model list, press to open the folder or to close the
folder and go back one level.
8. Scribble Strips Each of the six LCD scribble strips displays the name of its
assigned eect or item, so there are never any surprises during a show. You can
custom label scribble strips. See "Customizing a Footswitch". (And don't forget to
remove the protective lm covering these strips on your new HX Eects device!)
NOTE: If a particular footswitch has more than one block or item assigned,
the scribble strip may read “MULTIPLE (X)," where X is the number of as-
signments. See "Assigning Switches in Signal Flow View"
9. Footswitches 1-6 These capacitive, touch-sensitive footswitches have col-
ored LED rings that tell you the current state of the eect or item. While in Stomp
mode, briey touch (but don't press) a footswitch to quickly select the assigned
eect. Touch the switch repeatedly to cycle through multiple assigned items. See
"Stomp Mode"
SHORTCUT: While in Stomp footswitch mode, touch (but don’t press) a
footswitch for one second to spill all of its parameters across multiple scrib-
ble strips.
SHORTCUT: While in Stomp footswitch mode, touch and hold (but don’t
press) two switches to swap all assignments between them (including any
custom scribble strip names and LED colors).
10. MODE/EDIT/EXIT Switch Press MODE to toggle between Stomp and Pre-
set footswitch modes. Hold MODE for one second to engage Pedal Edit mode,
which lets you edit eects with your feet, allowing your hands can stay on the
guitar where they belong. See "Hands-Free Editing (Pedal Edit)" Press MODE/
EDIT/EXIT to exit Looper or Pedal Edit mode. See "Looper"
11. TAP/TUNER Switch Press TAP two or more times to set the BPM (beats per
minute) of any tempo-based eects such as delay or modulation. Press TAP once
to restart any LFO-based modulation eects. Hold TAP for one second to open
Tuner view. See "Tuner"
SHORTCUT: Touch (but don’t press) TAP to briey display the tempo panel.
This lets you quickly ne-tune the current tempo without navigating to the
Global Settings menu.