Product Datasheet/Brochure
Table Of Contents
7
Rear Panel
-2-
-1-
2
1
L/MONO RIGHT L/MONO RIGHT
USB DC IN
POWER
OUT/THRUIN
MIDI
OUTPUTINPUT
PEDAL /EXT AMP SEND RETURN
12 13 14 15 16 17
19
18
20
12. PEDAL/EXT AMP 1-2 Two expression pedals can be connected to the HX
Eects device and assigned to adjust a wide variety of parameters. By default,
EXP 1 is automatically assigned to control and bypass Wah/Pitch Wham type
blocks, and EXP 2 is automatically assigned to control Volume blocks, making
them ready for use with your connected expression pedal(s). See "Assigning a
Controller"
Alternatively, either jack can be connected to your traditional guitar amp to switch
its channels or turn its reverb on and o. Use a TRS cable for dual operation
(A=tip, B=ring). To set this jack's function. See "Global Settings > Preferences"
13. SENDS/RETURNS 1-2 These 1/4” ins and outs can be used as FX loops for
inserting external stompboxes between specic blocks in the HX Eects device
or as inputs and outputs for running 4-Cable Method rigs. See "4-Cable Method"
14. INPUT L/MONO, RIGHT Connect your guitar, bass guitar, or mono pedals
to the L/MONO input. Connect stereo pedals, keyboards, synths, or modelers to
both the L/MONO and RIGHT inputs.
15. OUTPUT L/MONO, RIGHT Use unbalanced 1/4" TS cables to connect to
your guitar amp or other pedals. When connecting to a mono pedal or single amp,
connect only the L/MONO 1/4" jack.
16. MIDI IN, OUT/THRU Connect the HX Eects hardware to your MIDI gear for
sending and receiving program changes, continuous controllers, and other MIDI
messages. (Note that MIDI communication is optionally also sent and/or received
via USB.)
17. USB Connect the HX Eects device to your Mac or Windows computer for
preset management and IR loading via the HX Edit application, updating to the
latest rmware, receiving MIDI control messages, and sending remote Command
Center messages to control various software. Use of a USB 2.0 or 3.0 port is re-
quired - Do not use an external USB hub.
18. DC In Line 6 recommends using only the supplied DC-3G power supply.
19. Cable Tie Wind the DC-3G's cable through one or both hooks to keep drunk
punters from stopping the show.
20. POWER switch It’s alive!