User manual

Line 6 POD Farm 1.01 – Start Here

1•11

Then press the “Go” button and the correct installer will be displayed for your system so that you can

download it to your computer. Once the download of the installer ﬁle completes, run the installer ﬁle

following its step-by-step instructions.

Windows

and Vista

users... When you see the Choose Hardware Type screen during the

POD Farm installation, be sure to check the box for “POD Farm iLok”, as shown here:

If you are also going to be using any Line 6 USB audio device (POD Studio, TonePort, POD X3,

PODxt or GuitarPort) then you’ll want to check the “POD Farm for Line 6 Devices” box as well.

Mac

Users... The POD Farm installer’s default settings will install the necessary ﬁles for your

iLok, as well as the audio drivers for any Line 6 USB audio devices automatically. If desired, you

can uncheck any individual POD Farm Plug-In formats and/or Line 6 Device Drivers that you may

not need. But you will need to install at least one POD Farm Plug-In format supported by your host

audio software so that you will be able to use POD Farm Plug-In with your iLok:

For further assistance with POD Farm installation, check out the Installer Guide document available

at POD Farm Online Help. With the above steps completed, you’ll be able to access and utilize POD

Farm Plug-In in your host audio software! You are, of course, free to use any audio type of audio

interface with your DAW conﬁguration. Please see the POD Farm Plug-In chapter for more info.

Note that POD Farm cannot be run in Standalone Operation with the iLok alone, since this requires the

use of a Line 6 POD Studio, TonePort or GuitarPort USB audio interface.