User manual

POD Farm 1.01 – Glossary (What Is...?)
9•19
The Record Send controls in POD Farm, Standalone Operation
For details about the Record Sends and options offered for your specific Line 6 device, please see
the Hardware chapter, and specifically look for the section covering your Line 6 hardware and for
Windows
®
or Mac
®
.
*Note - If you have a POD X3 or PODxt device, they offer their own internal options for what to route
out their Record Sends (Unprocessed, Semi-Processed or Processed) - these options are found in the
Outputs section of the POD onboard settings.
What is the Reference control in the Tuner?
This control is available within the Tuner View (in POD Farm Standalone operation only). It tells
the Tuner what to use as the base tuning reference. 440Hz is the standard reference value for A, and
is generally used for tuning reference in most modern music. So, unless you have a particular need
to adjust the Tuner’s reference (and tune your guitar to match something other than standard), you
probably want to stick with the standard 440Hz setting for this control.
p Return to What Is Topics
What is a Rotary Drum + Horn?