Owner manual

ManualsBrandsLine 6 ManualsAccessories for musicM9

required.It’sjustasifyouwereadjustingdifferentphysicalstompboxes,

each of which would still have the last knob settings you made to it. The

same is true as you switch scenes, swapping one virtual pedalboard for

another: when you come back to a previously used scene, it loads with

all the last adjustments you made to it.

If you prefer that scenes not remember your last adjustments, simultane-

ously press

1B + 2B to enter setup, then press the model encoder until

you see this screen:

MOMEN

1>2>3

MNL SAVE

Prefs Scenes

DSP BYP

SCENE

REL

DIM ON

POTS

NowsettheScenesparametertoMNL SAVE(ManualSave)instead

AUTOSAVE. You will then need to use the scene setup mode any

time you want to manually force a “save” of current settings to a scene:

Simultaneouslypressandhold

TAP + 3A then select and hold on the

samememorylocationyouarecurrentlyonto“save”.Displaywillsay

“

Save Completed”.

Tap Tempo

TaptempoisavailableforallDelayeffects,mostMODeffects,andsome

Filtereffects.ForDelayandMODeffectsturnthesecondtoprowknob

orforFiltersturntherstbottomrowknoboftheFXUnitalltheway

tomax,andyou’llswitchbetweentaptempoandregularcontrolmodes.

Onceyou’reinTaptempocontrolmode,turntheknobtoselectoneof

the available note values. Tap 2 or more times on the

TAP switch, and

all the effects set to tap tempo control will change theirtime/speed/

tempo to match the tempo you tapped. To end tap tempo operation

for an effect, turn the knob to max again.

NOTE: Parameters set to tap

tempocontrolareNOTaffectedbyexpressionpedaloperation.

Tuning

Simultaneouslypress

2B + 3BtoenterTunerMode.Alleffectsprocessing

andloopingwillbebypassed.Useyourlowerleftparameterknobtoset

yourreferencefrequency.Usethelowerrightparameterknobtoselect

either “

BYPASS AUDIO” or “MUTE AUDIO” for silent operation.

50 50

MUTE

AUDIO

440

REF

Mono / Stereo Operation

Somemodels(likeStereoDelay)providestereooperation.Whenrun

before a mono model (like a distortion), the signal will collapse to mono

as it feeds the mono effect, and will then be passed on in mono to the

next effect or outputs.

Effect Copy

Aneffectcanbecopiedtoanyothermemorylocationwithinascene.

For example you can copy your effect in memory location

FX Unit 1A

FX Unit 3B. To begin, select the memory location you would like to

copy (the effect must be on and currently showing its parameters in your

display). Press and hold the

Model Select knob. Your display should read

“

Copy Effect: Select Destination”. Press the memory footswitch for the

location you want to copy to. Your display now reads “

Copy Completed”.

Your copy is now stored in both the original and new location.

aDDitionaL setup

Accessallthesetupscreensbysimultaneouslypressing1B + 2B. Then

press the

MODEL SELECT knob to scroll through the different setup

pages.