Owner's Manual

MIDI Mobilizer & MIDI Memo Recorder Advanced Guide Page 12
POD 2.0, POD Pro, Bass POD, & Bass POD Pro
1. Press the MIDI button
2. Press the Save button –display should show "A" (for All)
3. Press the Save button
No setup is required for receiving MIDI Sys ex data.
POD xt, PODxt Pro, PODxt Live, Bass PODxt, Bass PODxt Pro & Bass PODxt Live
1. Press the Save button
2. Turn the Select knob until
MIDI Dump page
3. Turn the Effect Tweak knob until
display says "All Channels"
4. Press the Save button
No setup is required for
receiving MIDI Sys ex data.
POD X3 Live, POD X3 Pro
1. Hold the Home button for 2 seconds to enter Commands mode
2. Turn the Select knob until SYSEX TONE SEND is selected
3. Turn the knob below the display to choose
which sound to send
4. Press the Select/Save knob
No setup is required for receiving MIDI Sys ex data into the edit buffer.
Echo Pro, Mod Pro, & Filter Pro
1. Press the MIDI/Sys button
2. Turn the Program Select knob until display shows “DU”'
3. Turn the Time knob until the display shows “ALL”
4. Press the Save button
No setup is required for receiving MIDI Sys ex data.
M13 Stompbox Modeler
1. Press and hold the Looper Controls footswitch to enter Setup mode
2. Turn the Model Select knob on fX 4 until display says "Dump All?"
3. Press the Model Select knob
No setup is required for receiving MIDI Sys ex data.
M9 Stompbox Modeler
1. Press 1B & 2B footswitches simultaneously to enter Setup mode
2. Press the Model Select knob repeatedly until MIDI screen is displayed
3. Turn Model Select knob to "Dump All?"
4. Press and hold Tap Tempo and press the Model Select knob
No setup is required for receiving MIDI Sys ex data.
(requires software version 2.01 or above)