Owner's Manual

MIDI Mobilizer & MIDI Memo Recorder Advanced Guide Page 8
Playing MIDI
To play back a Memo, press the large green Play button, as shown below on the left. MIDI data from the
memo will be output at the MIDI Out, and an elapsed time counter will be displayed as shown in the
middle display below. At any time the playback can be paused by pressing the round Pause button.
When paused, MIDI will stop being output, the counter will stop elapsing, and the display will appear as
shown on the right. Playback can also be stopped at any time by pressing the red Stop button.
Note that since MIDI data is different than audio data, the sound from your MIDI device may or may not
stop when pressing Stop or Pause. This will depend on the type of sound selected and what data events
were taking place. Additionally, when resuming from Pause, any previously sustaining notes may
retrigger, which can also sound unexpected depending on the type of sound that is selected.
Memo Info
Press the Info button to get more
details on the currently selected
Memo, and to rename or send via
email. This page provides the total
number of MIDI messages (i.e., each
note played is one message, a note
released is another message), the
size of the Memo in bytes (each
message is typically three bytes,
although Sysex messages can be
much more), the length of the
Memo in minutes and seconds, and
the date and time it was created.
Pressing the Title arrow opens a page where the Memo can be renamed (as shown on the right).
Pressing “Send via Email” opens an email message with the current Memo attached as a Standard MIDI
File (SMF). This file format can be opened by most computer sequencing and recording computer
programs.