Owner's Manual

POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In
4•47
• In the Live “Device Panel,” place the inserted POD Farm 2 Plug-In into “Congure Mode.”
Click the arrow button to
expand the Live “Plug-In
Device” window
Click the Congure button
to put the Plug-In into
“Congure Mode”
Placing the inserted POD Farm 2 Plug-In into Configure Mode in Ableton Live
• Next, go into the POD Farm 2 Plug-In GUI, display the Edit Panel for the Amp or Effect to
which you have assigned a Knob or Switch parameter to an Automation Slot, and click once
on the specic Knob or Switch control. For example in the previous sections, we assigned the
Analog Delay W/Mod effect’s Mix knob to the Knob 2 Automation Slot. So we’ll click on this
Mix knob in the POD Farm Plug-In GUI:
Click on the Delay’s assigned
Mix knob...
The “Knob 2” Automation
Slot then appears within the
Live project’s POD Farm 2
Plug-In “device” window
Configuring an “assigned” POD Farm 2 Plug-In parameter in Ableton Live
• Repeat the above steps to congure all your assigned POD Farm 2 Plug-In parameters, and then
go to the Ableton Live “Control Chooser” for your track and you’ll be able to access each of
these as automatable parameters.
The assigned Automation Slots we
congured now appear in the Live
Control Chooser list as automatable
parameters
The Ableton Live track Control Chooser showing “configured” POD Farm 2 Plug-In parameters