Owner's Manual

POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware
2•3
GX
Connect your electric
Guitar or Bass
Instrument Input - Plug in your electric guitar or bass here to feed the instrument’s signal into the
POD Farm 2 standalone application. This allows you to choose your Tone, and then route the processed
signal to the Record Sends (to your audio software) and your ToneDirect™ monitoring signal to the
hardware outputs.
Connect your stereo
Headphones/Line Out Cable
Connect USB cable from here
to your computer
USB - Connect this stereo Line Out to your powered speakers or monitoring system. When connecting
GX as the primary audio interface on your computer, this output carries the Master stereo mix from
your DAW software, as well as anything plugged into the GX Instrument input. Alternatively, if you
prefer to listen to the audio directly from GX using stereo headphones, plug them in here.
If you‘re using a 3rd-party audio interface on your computer, these outputs supply the ToneDirect™
magic to your interface when using the POD Farm 2 standalone application alongside the Plug-In. See
“ToneDirect™ Monitoring” on page 2•30 for more details.