Owner's Manual

POD Farm 2 Advanced User Guide – How To....
8•4
How to edit Amp or Effects settings
All POD Farm 2 amps and effects can be edited easily in the Panel View. Just click the Panel View
button at the top left, and then click on any Amp or Effect model in your Signal Flow to display its
Edit Panel. (In POD Farm Elements Plug-Ins the current amp or effect panel is shown at all times.)
See “Panel View” on page 4•10.
Panel View, displaying a Delay effect’s Edit Panel
p Return to “How To...” contents
How to turn the POD Farm 2 software knobs
• Click your mouse anywhere on the knob.
• While continuing to hold the mouse button, drag the mouse up and down.
• Do not drag your mouse in a circular turning motion.
Also, check out the details on “ne-tuning” knobs and other settings…
p Return to “How To...” contents
How to fine-tune POD Farm’s knobs and Model or Tone menus
You can ne-tune the setting of most of the POD Farm 2 on-screen knobs as well as the Model and
Tone Preset menus.
For knobs:
• Click the left button of your mouse anywhere on the knob or other control.
• Use your keyboard’s left/right or up/down arrows to “ne-tune” it’s value, adjusting in small
increments.
• To “reset” the POD Farm 2 Mixer’s Balance knobs to center, double-click directly on the Balance
knob.
For Model and Tone menus:
• Click directly on the up & down arrows on the handy little “spinner” control at the left of many
POD Farm 2 menus to step through the menu’s contents.