Owner's Manual

POD Farm 2 Advanced User Guide – Using Your Line 6 Hardware
2•32
Setting Mac OS
®
X to use your Line 6 hardware as the Default Audio Device
These settings are made within the Audio MIDI Setup utility, found at /Applications/Utilities/Audio
MIDI Setup. Make the following settings for your Mac OS
®
X version.
Mac OS® X 10.4 & 10.5 - Audio MIDI Setup utility settings for Default Device
• Default Input - Set this to be your Line 6 audio device if you want your applications to use it for
audio recording.
Note: For Line 6 devices that offer multiple Source Inputs (UX1, UX2, UX8 & KB37), choose the Source
Input to record from within the Line 6 Audio-MIDI Settings application, found in System Preferences.
(See “The Line 6 Audio-MIDI Devices Dialog” on page 3•1.)
• Default Output - Set this to be your Line 6 audio device if you want your applications to use it
for audio playback.
• Properties For - Set this to be your Line 6 audio device to display sliders below to control its
recording and playback levels. (Keep the Audio Output sliders set to 100% and use the Output
& Phones knobs on your Line 6 hardware to adjust playback levels more easily.)