Owner's Manual
POD Farm 2 Advanced User Guide – Driver Panel & Recording
3•9
If the POD Farm 2 standalone application is currently running, then Sends 9-10 and 11-12 will carry
the type of signal dened within POD Farm 2 Mixer view - Record Send Source menus (Processed,
Semi-Processed or Dry) - see the POD Farm 2 standalone chapter’s “Mixer View” on page 6•8 section
for details.
Hardware Meters Show
Use this menu to select the input and output
levels you want the UX8’s hardware meters to
display.
Clock Source
Set your preferred UX8 clock source with this menu.
Select S/PDIF to sync the UX8 to a S/PDIF clock
source from another device’s digital output.
Outputs & Monitoring Tab (UX8 Only - Windows
®
)
Important: Note that the Outputs & Monitoring tab provides control over the monitor volume of
whatever you are inputting into UX8. These controls do not affect Send levels (the audio that streams
into your recording software), nor do they control the level of audio coming from your computer (such
as the playback level of your software’s session). In other words, volume and pan levels here are purely
analog, intended for monitoring live input levels (from instruments, mics, etc) to provide you with
independent level control over these items versus the playback levels of your audio software’s tracks.